Falcom GmbH STEPPII-56 Manual Do Utilizador
STEPP II HARDWARE DESCRIPTION VERSION
1.01
ON
Terminal is searching for satellites. Terminal
receives invalid GPS position, no GPS fix
obtained.
Flashing (4 sec.
interval)
Start-up GSM error
(i.e. no SIM card inserted or incorrect PIN
configuration or is not ready for operation)
GPS
(Yellow LED)
Continually flashing
Valid GPS data are being received, terminal
has obtained a GPS fix and ready for use.
Table 8:
Modes of the LED’s and associated functions
*
Please note that, this LED also works even if no external battery is
connected to the STEPP II, but in this case its functionality is invalid.
4.2 FALCOM STEPP II typical applications
The STEPP II is a plug and play device that can be used as mobile client in
different variety of system solutions:
different variety of system solutions:
Tracking
The vehicle to be tracked is fitted with a STEPP II and an antenna. GPS
satellites are continuously transmitting information, including when the data
being sent, which satellite sent it and the current reliability of the system.
The STEPP II fitted in the vehicle, receives this information from at least 4
satellites and carries out the necessary calculations to determine its current
position
satellites are continuously transmitting information, including when the data
being sent, which satellite sent it and the current reliability of the system.
The STEPP II fitted in the vehicle, receives this information from at least 4
satellites and carries out the necessary calculations to determine its current
position
.
AVL
The embedded GPS receiver into the STEPP II determines its current
location, speed and heading. This data can be stored or can be directly
transmitted to a control centre. The terminal reports its position to the base
station over GSM or GPRS (Internet) communications network. Current
position can also be displayed on a digital maps installed on PC/PDA.
location, speed and heading. This data can be stored or can be directly
transmitted to a control centre. The terminal reports its position to the base
station over GSM or GPRS (Internet) communications network. Current
position can also be displayed on a digital maps installed on PC/PDA.
Security
Such as Telephone, Position, Speed/Course, Temperature, Remote reading,
Alarm, Movement, Fire, Gas, Water level and many others
Alarm, Movement, Fire, Gas, Water level and many others
.
Setting alarm inputs
For each input several telephone numbers (destination numbers) can be
configured. Beside the destination number, alarm text as SMS with the
desired GPS protocol (max. 2 protocols) can be configured.
The alarm type could also be voice, and data connection.
configured. Beside the destination number, alarm text as SMS with the
desired GPS protocol (max. 2 protocols) can be configured.
The alarm type could also be voice, and data connection.
Remote Monitoring
......
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 21