HIMS International Corporation B14K Manual Do Utilizador

7)  A. if using windows 7/8, Windows will locate and automatically 

install the drivers. If running XP, please use step B, and the 
subsequent numbered steps. 

B. When the "Found New Hardware Wizard" appears, select 
"Install from a specific location" using the "Down arrow", and then 
press the "Next" button.   

8) When the "Please choose your search and install option" 

message appears, select "Don't search. I will choose the driver to 
install", and press the "Next" button.   

9)  You are prompted to "Select the device driver you want to install 

for this hardware", select "HIMS USB DRIVER" and press the "Next" 
button.  

10) "Completing 

the 

Found 

New Hardware Wizard" should 

appear. Select the "Finish" button.   

   

When you have finished installation of the USB driver on the PC, please 
follow the instructions for connecting the display with your screen reader 
via USB. 

   

4.2 Connecting to PC via Bluetooth serial port 

The following steps will walk you through setting up the Smart Beetle to 
be used as a Bluetooth Terminal for Screen Reader. These instructions 
assume that you already have Bluetooth installed on your computer. The 
following instructions also assume that you are running at least Windows 
XP, Service Pack 2. 

Before you begin, make sure that your Smart Beetle is turned on, in 
"Pairing BRL" mode, and be aware of the unit's designated Bluetooth 
name. 

1.  Instructions for windows XP 

1) Navigate to the Bluetooth icon in the System Tray. You may 

open the system tray by pressing "windows key-b", then press 
the Right or Left Arrow Key until you reach the Bluetooth icon. 
Then, press the "Applications" key".   

Note: If the Bluetooth icon does not appear in the System Tray, 
you may have to change the settings for the Bluetooth icon to 
appear. Go to the Windows Control Panel, Bluetooth Devices,