FreeWave Technologies Inc. 42182112519 Manual Do Utilizador
Spread Spectrum Modem Wireless Data Transceiver Installation Guide
LIG0003AD Rev A
Version 6.0
5
900MHz Omni-directional Antennas
Gain Manufacturer
Manufacturer
Model Number
FreeWave
Model Number
6dBi
Antennex
FG9026
EAN0906NF
5dBi Antennex
Maxrad
EB8965C
BMEFC8985HD
EAN0905WC
5.15dBi
Maxrad
MAX-9053
EAN0900WC
2dBi Mobile
Mark
PSKN3-925S EAN0900SR
2dBi Mobile
Mark
PSTG0-915SE
EAN0900SQ
2dBi Astron
ADP91BM ---
WARNING: Any antennas placed outdoors must be properly grounded. Use extreme
caution when installing antennas and follow all instructions included with the antennas.
Table 1 below provides the maximum output power settings for FreeWave transceivers at given
antenna gain (10 dB and 6 dB Yagi antennas are given as an example) and cable loss
combinations. Please note that it is the installer’s responsibility to ensure that the emission
limits are not exceeded
.
Table 1:
Output Power Settings at given Antenna Gain &
Cable Loss combination.
Cable
Loss
1dB 2dB 3dB 4dB
Antenna
10dB
5 6 7 9
Gain
6dB
9 9 9 9
Table 2 below shows how the RFXmitPower settings on the radio correspond to the EIRP of the
transceiver-cable-antenna combination for a 10dB Yagi antenna at different cable loss values.
Table 2:
EIRP for 10dB Yagi Antenna Cable loss vs. RF
Xmit Power Setting.
Cable
Loss
1dB 2dB 3dB 4dB
RF Xmit
10
39.00
38.00
37.00 36.00
Power 9 37.80
36.80 35.80 34.80
8
36.30 35.30 33.30 32.30
7 34.40 33.40 32.40 31.40
6 32.20 31.20 30.20 29.20
Shaded area indicates combinations where EIRP limitations exceed FCC regulations
and RF Xmit Power must be reduced.