Hetronic International Inc MFS-TX-2G4 Manual Do Utilizador
1. DESCRIPTION
The MFS-TX-2G4 is a 2.4GHz MFS Transmitter with 24 digital channel inputs. Four of the inputs
may be used with a 4-bit gray code trigger. The transmitter uses a 2.4GHz DSSS transceiver for RF
transmission and reception. The 2 operation channels (primary and secondary) can be set to any 2 of
16 available channels. The transmission duty cycle is adjustable from 1-10%. Additionally, this unit
always receives feedback which may be used to control optional status LEDs and/or vibration motor.
may be used with a 4-bit gray code trigger. The transmitter uses a 2.4GHz DSSS transceiver for RF
transmission and reception. The 2 operation channels (primary and secondary) can be set to any 2 of
16 available channels. The transmission duty cycle is adjustable from 1-10%. Additionally, this unit
always receives feedback which may be used to control optional status LEDs and/or vibration motor.
Note: Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
2. TECHNICAL SPECIFICATIONS
Temperature Range
-20°C to +70°C
Supply Voltage Range
2-5 VDC
Supply Current
20mA max
40mA for 5 seconds on startup
40mA for 5 seconds on startup
Outputs
1 Pulsed Vibration Motor
5 Status LEDs (3 Feedback Controlled)
RF/Cable Backup Control Data
5 Status LEDs (3 Feedback Controlled)
RF/Cable Backup Control Data
Inputs
24 Digital TTL Inputs
1 Optional Label Switch Input
RF/Cable Backup Feedback
1 Optional Label Switch Input
RF/Cable Backup Feedback
Note: The user is cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment.
the party responsible for compliance could void the user’s authority to operate the
equipment.