Remotec Technology Limited BW8170 Manual Do Utilizador

Página de 34
32 
 
Frequently Asked Questions
 
 
Q  Why won’t my ZTS-500US work with the Z-Wave devices purchased in another country? 
A  Due to differing regulations in different countries, Z-Wave products from different regions are 
set to different frequencies. Before purchasing new devices, be sure to check if the devices are 
compatible in your region.   
 
Q  Do I need an electrician to install a ZTS-500US in my home? 
A  It is strongly recommended that a qualified technician install this product. 
 
Q  How do I know which product is compatible with my ZTS-500US? 
A   The ZTS-500US is compatible with any Z-Wave controller or gateway that has the control 
capability for “Thermostat” devices. All Z-Wave products are also labelled with the Z-Wave logos 
shown below. 
 
 
   
 
Q  Can I use 2 or more ZTS-500US in my house? If so, what is the max. units? 
A  Yes, you can use multiple ZTS-500USs in a single home. The maximum number of units depends 
on the capabilities of the gateways and controllers. For example, different gateways can support 
up to 8, 16, or 32 ZTS-500US on a given network.   
 
Q   What is the recommended battery type for the ZTS-500US and what is estimated batteries 
service life? 
A  Alkaline batteries are recommended for the ZTS-500US. 
Batteries service life is very dependent on the amount of usage per day. With normal use, 
approximate battery service life is 1 year while operated in FLiRS mode. 
If you are using battery power as the main power source or as a back-up while AC power is down 
and the ZTS-500US is in Z-Wave Always Listening mode, the battery will drain very fast (battery 
will only survive 3-5 days). 
 
 
Technical Specifications 
 
Model no. 
BW8170US (ZTS-500US) 
RF frequency 
908.4MHz (ZTS-500US) 
RF operating distance 
up to 132ft (40m) outdoor line of sight, in unobstructed 
environment 
Z-Wave association group 
Supports 3 association groups, max. 5 nodes ID can be assigned to 
these association groups. 
LED and button 
Curved white LEDs display 
Resolution: 18 x 6 dots 
VA: 64mm x 28mm 
Status icons: 7   
“<”, “>”, “+” and “–“ control buttons and LEDs 
Powered by 
Dry battery AA x 4pcs or 
24 VAC +/- 20% 50/60Hz 
Relay contact   
Voltage: 24 VAC 50/60 Hz 
Current: 1A Max. (inductive) 
Temperature display resolution 
1°F / 0.5 °C 
Temperature measurable range 
32 – 99 °F / 0 – 37 °C 
Temperature Setting range 
41-99 °F / 5-37 °C 
Temperature 
Operating: 32 – 122 °F / 0 – 50 °C