Remotec Technology Limited BW8170 Manual Do Utilizador
33
Storage: 23 – 140 °F / -5 – 60 °C
Dimension (L x H x T)
160mm x 100mm x 28mm
Weight
190g (Batteries excluded)
Checking Accessories
After opening the cover of the packing box, check that the following accessories are included.
ZTS-500US
Screw + Wall Anchor x 2pcs
AA batteries x 4pcs (optional)
User Manual
Warranty sheet
Wireless Information
This device has an open-air line-of-sight transmission distance of 132 feet (40m) which complies
with the Z-Wave standards. Performance can vary depending on the amount of objects in between
Z-Wave devices such as walls and furniture. Every Z-Wave device set up in your network will act as a
signal repeater allowing devices to talk to each other and find alternate routes in the case of a
reception dead spot.
Radio frequency limitations:
1.
with the Z-Wave standards. Performance can vary depending on the amount of objects in between
Z-Wave devices such as walls and furniture. Every Z-Wave device set up in your network will act as a
signal repeater allowing devices to talk to each other and find alternate routes in the case of a
reception dead spot.
Radio frequency limitations:
1.
Each wall or object (i.e.: refrigerator, bookshelf, large TV, etc) can reduce the maximum range
of 65 feet (20m) by up to 20 to 30%.
of 65 feet (20m) by up to 20 to 30%.
2.
Plasterboard and wooden walls block less of the radio signal then concrete, brick or tile walls
which will have more of an effect on signal strength.
which will have more of an effect on signal strength.
3.
Wall mounted Z-Wave devices will also suffer a loss of range if they are housed in metal
junction boxes which could also reduce the range by up to 20 to 30%.
junction boxes which could also reduce the range by up to 20 to 30%.
Maintenance
Do not expose your unit to dust, strong sunlight, humidity, high temperatures or mechanical shocks.
1.
1.
Do not use old and new batteries together as old batteries tend to leak.
2.
Do not use corrosive or abrasive cleansers on your unit.
3.
Keep the unit dust free by wiping it with a soft, dry cloth.
4.
Do not disassemble the unit, it contains no user-serviceable parts.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,