Digi International Inc XBEEPRO2 Manual Do Utilizador

The XBee RF Modules have been certified for use in several European countries. For a complete list, refer to 
www.digi.com

If the XBee RF Modules are incorporated into a product, the manufacturer must ensure compliance of the 
final product to the European harmonized EMC and low-voltage/safety standards. A Declaration of 
Conformity must be issued for each of these standards and kept on file as described in Annex II of the 
R&TTE Directive. 

Furthermore, the manufacturer must maintain a copy of the XBee user manual documentation and ensure 
the final product does not exceed the specified power ratings, antenna specifications, and/or installation 
requirements as specified in the user manual. If any of these specifications are exceeded in the final 
product, a submission must be made to a notified body for compliance testing to all required standards.

The 'CE' marking must be affixed to a visible location on the OEM product.

The CE mark shall consist of the initials "CE" taking the following form:

•If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must 

be respected.
•The CE marking must have a height of at least 5mm except where this is not possible on account of 

the nature of the apparatus.
•The CE marking must be affixed visibly, legibly, and indelibly.

France: Outdoor use limited to 10 mW EIRP within the band 2454-2483.5 MHz.

Norway: Norway prohibits operation near Ny-Alesund in Svalbard. More information can be found at the 
Norway Posts and Telecommunications site (www.npt.no).

Digi has issued Declarations of Conformity for the XBee RF Modules concerning emissions, EMC and safety. 
Files can be obtained by contacting Digi Support.

Important Note:

Digi does not list the entire set of standards that must be met for each country. Digi customers assume full 
responsibility for learning and meeting the required guidelines for each country in their distribution market. 
For more information relating to European compliance of an OEM product incorporating the XBee RF 
Module, contact Digi, or refer to the following web sites:

CEPT ERC 70-03E - Technical Requirements, European restrictions and general requirements: Available at 
www.ero.dk/.

R&TTE Directive - Equipment requirements, placement on market: Available at www.ero.dk/.

When integrating high-gain antennas, European regulations stipulate EIRP power maximums. Use the 
following guidelines to determine which antennas to design into an application.

The following antennas types have been tested and approved for use with the XBee Module: