Digi International Inc XBEEPRO2 Manual Do Utilizador

RF module was tested and approved with 15 dBi antenna gain with 1 dB cable-loss (EIRP Maximum of 
14 dBm). Any Yagi type antenna with 14 dBi gain or less can be used with no cable-loss.

RF module was tested and approved with 15 dBi antenna gain with 1 dB cable-loss (EIRP Maximum of 
14 dBm). Any Omni-Directional type antenna with 14 dBi gain or less can be used with no cable-loss.

RF module was tested and approved with 19 dBi antenna gain with 4.8 dB cable-loss (EIRP Maximum 
of 14.2 dBm). Any Flat Panel type antenna with 14.2 dBi gain or less can be used with no cable-loss.

The following antennas have been tested and approved for use with the embedded XBee RF Module:

- Dipole (2.1 dBi, Omni-directional, Articulated RPSMA, Digi part number A24-HABSM)

- Chip Antenna (-1.5 dBi)

- Attached Monopole Whip (1.5 dBi)

The following antennas have been tested and approved for use with the embedded XBee-PRO RF Module:

- Dipole (2.1  dBi, Omni-directional, Articulated RPSMA, Digi part number A24-HABSM)

- Chip Antenna (-1.5 dBi)

- Attached Monopole Whip (1.5 dBi)

      - Integral PCB Antenna (-0.5 dBi)

The following antennas have been tested and approved for use with the embedded XBee-PRO RF Module:

- Dipole (2.1 dBi, Omni-directional, Articulated RPSMA, Digi part number A24-HABSM)

- PCB Embedded Trace Antenna (-0.5dBi)

- Attached Monopole Whip (1.5 dBi).

Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on the 
outside of the final product enclosure must display the following text:

Contains Model XBee Radio, IC: 4214A-XBEE2

The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B - 
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accepts FCC 
test report or CISPR 22 test report for compliance with ICES-003.

If it contains an XBee-PRO (S2) RF Module, the clearly visible label on the outside of the final product 
enclosure must display the following text:

 Contains Model XBee PRO Radio, IC: 1846A-XBEEPRO2

If it contains an XBee-PRO (S2B) RF Module, the clearly visible label on the outside of the final product 
enclosure must display the following text:

 Contains Model XBee PRO S2B Radio, IC: 1846A-PROS2B

The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B - 
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accepts FCC 
test report or CISPR 22 test report for compliance with ICES-003.