Cameo Communications Inc DSLR2001N Manual Do Utilizador
Configure the Computer
TRENDnet
DSLR-2001N
18
1.
Click Start > Settings > Control
Panel > Network and Dial-up
Connections.
Panel > Network and Dial-up
Connections.
2.
Double-click Local Area
Connection.
Connection.
3.
Click Properties.
4.
On the network components list,
make sure that Internet Protocol
(TCP/IP) is checked. If not, check
it to enable the Properties
button.
make sure that Internet Protocol
(TCP/IP) is checked. If not, check
it to enable the Properties
button.
5.
Select Internet Protocol (TCP/IP),
and then click Properties.
and then click Properties.
6.
On the General tab, select Obtain
an IP Address automatically and
Obtain DNS server address
automatically.
an IP Address automatically and
Obtain DNS server address
automatically.
7.
Click OK.
General Page
3.3
Windows XP
If you are using Windows
XP, follow the instructions below to
configure your computer.
1.
Click Start > Control Panel >
Network Connections.
Network Connections.
2.
Right-click Local Area Connection,
then click Properties.
then click Properties.
3.
On the network components list,
make sure that Internet Protocol
(TCP/IP) is checked. If not, check
it to enable the Properties
button.
make sure that Internet Protocol
(TCP/IP) is checked. If not, check
it to enable the Properties
button.
4.
Select Internet Protocol (TCP/IP),
and then click Properties.
and then click Properties.
5.
On the General tab, select Obtain
an IP Address automatically and
Obtain DNS server address
automatically.
an IP Address automatically and
Obtain DNS server address
automatically.
6.
Click OK.
General Page