Cameo Communications Inc DSLR2001N Manual Do Utilizador
Configure the Computer
TRENDnet
DSLR-2001N
19
3.4
Windows Vista
If you are using Windows
Vista, follow the instructions below to
configure your computer.
1.
Click Start > Control Panel >
Network and Internet Connections >
Network Connections.
Network and Internet Connections >
Network Connections.
2.
Right-click Local Area Connection,
then click Properties.
then click Properties.
3.
On the General tab, make sure that
Internet Protocol (TCP/IP) is
checked. If not, check it to
enable the Properties button.
Internet Protocol (TCP/IP) is
checked. If not, check it to
enable the Properties button.
4.
Select Internet Protocol (TCP/IP),
and then click Properties.
and then click Properties.
5.
Select Obtain an IP Address
automatically and Obtain DNS
server address automatically.
automatically and Obtain DNS
server address automatically.
6.
Click OK.
General Page
3.4
Windows 7
If you are using Windows
7, follow the instructions below to
configure your computer.
1.
Click Start > Control Panel >
Network & Sharing Center.
Network & Sharing Center.
2.
Click Local Area Connection.
3.
Click Properties.
4.
On the network components list,
make sure that Internet Protocol
(TCP/IP) is checked. If not, check
it to enable the Properties
button.
make sure that Internet Protocol
(TCP/IP) is checked. If not, check
it to enable the Properties
button.
5.
Select Internet Protocol (TCP/IP),
and then click Properties.
and then click Properties.
6.
On the General tab, select Obtain
an IP Address automatically and
Obtain DNS server address
automatically.
an IP Address automatically and
Obtain DNS server address
automatically.
7.
Click OK.
General Page