Cameo Communications Inc DSLR2001N Manual Do Utilizador
Setup
TRENDnet
DSLR-2001N
42
DHCP Setting
This section allows you to configure your Modem Router to use the
Dynamic Host Configuration Protocol (DHCP). You can set your Modem
Router as a DHCP server or a DHCP relay agent of your network.
Dynamic Host Configuration Protocol (DHCP). You can set your Modem
Router as a DHCP server or a DHCP relay agent of your network.
The information required on the DHCP Setting screen vary depending
on the selected DHCP option.
on the selected DHCP option.
DHCP Option — Select the DHCP mode of your Modem Router. Options
are:
are:
•
Disabled: Select this setting if there is already a DHCP
server on your network and all devices on your network are
using static IP addresses.
server on your network and all devices on your network are
using static IP addresses.
•
DHCP Server: By default, your Modem Router is set as a DHCP
server. See more details below.
server. See more details below.
•
DHCP Relay: Select this setting to set your Modem Router as
a DHCP Relay agent. See description on the next page.
a DHCP Relay agent. See description on the next page.
☞
NOTE: If you want to set your Modem Router as a DHCP server,
make sure there is no other DHCP server on your network.
make sure there is no other DHCP server on your network.
DHCP Server
If you set your Modem Router as the DHCP server, your Modem Router
will automatically assign an IP address to each computer on your
network. By default, the fields for DHCP settings have predefined
values. It is recommended to retain these values unless specified
by your ISP.
will automatically assign an IP address to each computer on your
network. By default, the fields for DHCP settings have predefined
values. It is recommended to retain these values unless specified
by your ISP.
IP Pool Starting Address — Enter the lowest range of IP address to
assign. The default value is 192.168.10.101.
assign. The default value is 192.168.10.101.
IP Pool Ending Address — Enter the highest range of IP address to
assign. The default value is 192.168.10.200.
assign. The default value is 192.168.10.200.
Subnet Mask — Enter the subnet mask. The default value is
255.255.255.0.
255.255.255.0.