Cameo Communications Inc DSLR2001N Manual Do Utilizador
Setup
TRENDnet
DSLR-2001N
43
IPRouters — Enter the IP address of your Modem Router. The default
value is 192.168.10.1.
value is 192.168.10.1.
Primary DNS Server and Secondary DNS Server — Enter a primary and
a secondary DNS server if the DNS Relay option is enabled.
a secondary DNS server if the DNS Relay option is enabled.
Lease Time — Enter the lease time in seconds. The lease time is
the amount of time a device is allowed connection to your Modem
Router using its current dynamic IP address. At the end of the
lease time, the lease is either renewed or a new IP address is
assigned. The default value is 86400 seconds (1 day).
the amount of time a device is allowed connection to your Modem
Router using its current dynamic IP address. At the end of the
lease time, the lease is either renewed or a new IP address is
assigned. The default value is 86400 seconds (1 day).
Sub Range IP Enable — Check this box to set another range of IP
address.
address.
•
Vendor Class (Option 60): Enter a vendor class name.
•
Sub-String Match: Check to enable the sub-string match
function.
function.
•
IP Pool Starting Address — Enter the lowest sub range of IP
address to assign.
address to assign.
•
IP Pool Ending Address — Enter the highest sub range of IP
address to assign.
address to assign.
•
Subnet Mask — Enter the subnet mask.
•
IPRouters — Enter the IP address of your Modem Router.
•
Primary DNS Server and Secondary DNS Server — Enter a
primary and a secondary DNS server of the sub range.
primary and a secondary DNS server of the sub range.
Extra Option Enable — Check this box to enable extra options.
•
Option 240, Option 241, Option 242, Option 244, and Option
245: Enter a name for the corresponding option.
245: Enter a name for the corresponding option.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
button to discard your changes.
DHCP Relay
Some ISPs function as the DHCP server for their clients’ small
office network. In this case, you can set your Modem Router to act
as a DHCP relay agent. When a device on your network requests
Internet access, your Modem Router contacts the ISP to obtain the
IP configuration, and then forwards the information to that device.
office network. In this case, you can set your Modem Router to act
as a DHCP relay agent. When a device on your network requests
Internet access, your Modem Router contacts the ISP to obtain the
IP configuration, and then forwards the information to that device.
DHCP Server IP — Enter the IP address of the DHCP server.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
button to discard your changes.
DHCP Reserved Address
This section lists the DHCP reserved addresses on your network. If
your Modem Router is set as the DHCP server, your Modem Router can
reserve a particular IP address to a specific device. To reserve
an IP address, click the Add button.
your Modem Router is set as the DHCP server, your Modem Router can
reserve a particular IP address to a specific device. To reserve
an IP address, click the Add button.