Cameo Communications Inc DSLR2001N Manual Do Utilizador
Advanced
TRENDnet
DSLR-2001N
67
Destination Start Port and Destination End Port — Enter the
starting and ending port range of the destination of the packets.
starting and ending port range of the destination of the packets.
ICMP Type — Select an ICMP type from the drop-down list. If the
selected type is met, the filter is implemented.
selected type is met, the filter is implemented.
Click the Apply button to save and activate the rule or click the
Cancel button to discard your changes.
Cancel button to discard your changes.
Statistics
This page displays the filter and rule statistics.
To access the Statistics page, click ADVANCED > Packet Filter >
Statistics or click the Statistics button.
Statistics or click the Statistics button.
Click the Refresh button to refresh the list.
6.9
Static Route
This page allows you to create routing tables.
To access the Static Route page, click ADVANCED > Static Route.
Click the Add button to create a static route.
Forwarding Policy Option — Select whether to enable or disable
routing.
routing.
Rule Name — Enter desired rule name.
Source IP — Enter the source IP address.
Source SubMask — Enter the source subnet mask.
Dest IP — Enter the destination IP address.
Dest SubMask — Enter the destination subnet mask.
Gateway — Enter the gateway.
Interface name — Select the interface to implement the routing.