Cameo Communications Inc DSLR2001N Manual Do Utilizador
Advanced
TRENDnet
DSLR-2001N
78
If packet length is used as a criteria, select the Packet Length
Rule from the drop-down list and enter the Packet Length.
Rule from the drop-down list and enter the Packet Length.
Specify Classification Results
Some fields may not be applicable; if so, leave inapplicable
fields empty.
fields empty.
Assign Classification Queue — Select the classification queue from
the drop-down list. Only enabled classification queues from the
Queue Classification page are listed here.
the drop-down list. Only enabled classification queues from the
Queue Classification page are listed here.
Set VLAN Priority — To set the VLAN priority, select a priority
from the drop-down list
from the drop-down list
Mark DSCP — Select the DSCP mark from the drop-down list. If the
DSCP mark that you want is not listed, select either Public DSCP
value or Private DSCP value.
DSCP mark that you want is not listed, select either Public DSCP
value or Private DSCP value.
Default VLAN ID — Check this box to use the default VLAN ID.
VLAN ID — If Default VLAN ID is not checked, enter preferred VLAN
ID.
ID.
Forwarding Policy Name — Select the forwarding policy name from
the drop-down list.
the drop-down list.
Click the Apply button to save and apply the settings or click the
Cancel button to discard your changes.
Cancel button to discard your changes.
QoS Status
This page allows you to view the QoS status.
To access the QoS Status page, click ADVANCED > Quality of Service
> QoS Status or click the QoS Status button.
> QoS Status or click the QoS Status button.
Click the Refresh button to refresh the table.