Cameo Communications Inc DSLR2001N Manual Do Utilizador
Advanced
TRENDnet
DSLR-2001N
80
6.16 SNMP
Simplified Network Management Protocol (SNMP) is a troubleshooting
and management protocol that is used to monitor the status and
change the configurations of your Modem Router locally or remotely.
It also allows configuring and receiving of trap messages from
network devices that are configured for SNMP.
and management protocol that is used to monitor the status and
change the configurations of your Modem Router locally or remotely.
It also allows configuring and receiving of trap messages from
network devices that are configured for SNMP.
To access the SNMP page, click ADVANCED > SNMP.
SNMP — Check this box to enable SNMP.
System Contact — Enter the contact person or contact information
for your Modem Router.
for your Modem Router.
System Name — Enter an assigned name for your Modem Router.
System Location — Enter an assigned location for your Modem Router.
Public Community and Private Community — Enter a public and
private community name.
private community name.
Trap — Check this box to enable the Trap function, then provide
the following information:
the following information:
•
Trap Version: Select an SNMP trap version from the drop-
down list.
down list.
•
Trap Address: Enter the destination IP address of the SNMP
trap.
trap.
Click the Apply button to save and apply changes or click the
Cancel button to discard your changes.
Cancel button to discard your changes.