Bruno Independent Living Aids Inc PCB4950 Manual Do Utilizador
© 1998 BRUNO INDEPENDENT LIVING AIDS, INC.
21
INSTALLATION / REMOTE CALL/SEND
MOUNTING THE CALL/SEND MODULES
THE UNITS CAN BE MOUNTED TO A WALL WITH THE
ADHESIVE-BACKED VELCRO PROVIDED. THE CALL SEND
MODULE SHOULD BE MOUNTED SO OPERATOR CAN
ALWAYS VIEW THE ELEVATOR AND OUT OF REACH OF
CHILDREN.
ADHESIVE-BACKED VELCRO PROVIDED. THE CALL SEND
MODULE SHOULD BE MOUNTED SO OPERATOR CAN
ALWAYS VIEW THE ELEVATOR AND OUT OF REACH OF
CHILDREN.
TESTING THE UNIT
A SLIGHT DELAY WILL OCCUR BETWEEN THE TIME THE
ROCKER SWITCH IS DEPRESSED AND THE INITIATION OF
CARRIAGE MOVEMENT. THIS IS NORMAL AND IS A
FUNCTION OF THE SOFT START FEATURE OF THE
CONTROLLER.
ROCKER SWITCH IS DEPRESSED AND THE INITIATION OF
CARRIAGE MOVEMENT. THIS IS NORMAL AND IS A
FUNCTION OF THE SOFT START FEATURE OF THE
CONTROLLER.
[ ]
Run the unit up and down the stairs with the Rocker
Switch on the Carriage. The unit should operate in such
a way that the Rocker Switch is depressed in the
desired direction of travel.
Switch on the Carriage. The unit should operate in such
a way that the Rocker Switch is depressed in the
desired direction of travel.
The unit should travel noticeably faster going up than down.
[ ]
Run the unit up and down the stairs with the Remote
Call/Send modules. Test both Modules.
Call/Send modules. Test both Modules.
[ ]
Fold the seat into the stored position and run the unit up
and down the stairs with the Remote Call/Send Module.
and down the stairs with the Remote Call/Send Module.
FIGURE 18
ALWAYS "PARK" THE CARRIAGE AT THE UPPER
OR LOWER END OF THE RAIL TO KEEP BATTERIES
FULLY CHARGED
PILOT LAMP INDICATES
"CHARGING CONTACT" AND
CORRECT POLARITY.
BE SURE CHARGER IS
PLUGGED INTO A "LIVE"
OUTLET.