CyberData Systems 011097 Manual Do Utilizador
VoIP V2 Loudspeaker Amplifier
CyberData Corporation
3 Justin Court, Monterey, CA 93940
831.373.2601
Fax: 831.373.4193
www.cyberdata.net
CyberData Corporation
3 Justin Court, Monterey, CA 93940
831.373.2601
Fax: 831.373.4193
www.cyberdata.net
VoIP V2 Loudspeaker Amplifier
CyberData Corporation
3 Justin Court, Monterey, CA 93940
831.373.2601
Fax: 831.373.4193
www.cyberdata.net
The IP Endpoint Company
The IP Endpoint Company
Features
SIP and Simultaneous Multicast
Dual-speed ethernet 10/100 Mbps
Web-based configuration
PoE 802.3at and 802.3af-enabled
Line-in for background music
Line-out connector
DTMF controlled relay
Direct 8 Ohm speaker drive
User-uploadable tones and messages
Digital and manual volume control
Second SIP endpoint "Night Ringer"
Autoprovisioning
Auto-call voice message from input port sense
The new CyberData V2 SIP-enabled VoIP Loudspeaker
Amplifier provides an easy method for implementing an IP-based
overhead paging system for both new and legacy installations.
Now with up to 25 watts output (802.3at)
With up to 25 watts of driving power (802.3at), the Amplifier
provides direct drive of a standard Horn speaker and supports
a line-out connector for connection to an external amplifier.
The interface is compatible with most SIP-based IP PBX
servers that comply with the SIP RFC 3261. For non-SIP
environments, the Loudspeaker Amplifier can be configured to
listen to multicast address and port number combinations to
form paging zones.
Ringer Mode
The VoIP V2 Loudspeaker Amplifier supports two SIP
extensions. One extension can be assigned to a page group for
auto answer paging. The second extension can be assigned to
a “First-to-Answer” ring group with IP phones. An audio ring file
is activated when the second SIP extension of the ceiling
speaker is dialed. If any of the IP phones in the ring group is
answered (or if the caller hangs up), the Loudspeaker Amplifier
stops ringing.
Loudspeaker (part #011068) must be purchased separately.
Specifications
Output
802.3af - up to 8 watts
802.3at - up to 25 watts
Dimensions
Power Input
PoE 802.3at or 802.3af
Ethernet I/F
10/100 Mbps
G711
Payload Types
2 Years Limited
Warranty
Protocol
SIP RFC 3261
Regulatory Compliance
FCC Class A
-30 to 55 C (-22 to 131 F)
Operating Temperature
14" x 10" x 4"
Boxed Weight
6.5 lbs.
Part Number
Loudspeaker Amplifier, AC
011095
Loudspeaker Amplifier, Wireless
Loudspeaker Amplifier, PoE
011097
011096
Line Out:
Output Signal Amplitudes
2.0 VPP maximum
Output Level
+2dBm nominal
Total Harmonic Distortion
0.5% maximum
Output Impedance
10k Ohm
Line In:
Input Signal Amplitudes
2.0 VPP maximum
Input Impedance
10k Ohm
011068
Loudspeaker Part Number