Silverstone SST-DA750 Manual Do Utilizador
8
6. Agency Requirements
6.1 Safety Certification.
Product Safety:
UL 60950-1 2000Edition, IEC60950-1, 3
rd
Edition
EU Low Voltage Directive (73/23/EEC) (CB)
TUV, CCC
TUV, CCC
RFI Emission:
FCC Part15 ( Radiated & Conducted Emissions )
CISPR 22,3
CISPR 22,3
rd
Edition /
EN55022: 1998 + A1: 2000
)
PFC Harmonic:
EN61000-3-2:2000
Flicker:
EN61000-3-3: 1995 + A1: 2002
Immunity against:
-Electrostatic discharge:
-Radiated field strength:
-Fast transients:
-Surge voltage:
-RF Conducted
-Voltage Dips and Interruptions
-Electrostatic discharge:
-Radiated field strength:
-Fast transients:
-Surge voltage:
-RF Conducted
-Voltage Dips and Interruptions
EN55024: 1998 + A1: 2001 and A2: 2003
-IEC 61000-4-2
-IEC 61000-4-3
-IEC 61000-4-4
-IEC 61000-4-5
-IEC 61000-4-6
-IEC 61000-4-11
-IEC 61000-4-3
-IEC 61000-4-4
-IEC 61000-4-5
-IEC 61000-4-6
-IEC 61000-4-11
Table 16 –
Safety Certification
6.2 AC Input Leakage Current
Input leakage current from line to ground will be less than 3.5mA rms. Measurement will be made at
240 VAC and 60Hz.
240 VAC and 60Hz.
7. Reliability
7.1 Mean Time Between Failures (MTBF)
The MTBF of the power supply shall be calculated utilizing the Part-Stress Analysis method of
MIL217F or Bell core RPP. The calculated MTBF of the power supply shall be greater than 100,000
hours under the following conditions:
MIL217F or Bell core RPP. The calculated MTBF of the power supply shall be greater than 100,000
hours under the following conditions:
Full rated load
120V AC input
Ground Benign
120V AC input
Ground Benign
25
°C
7.2 Warranty
Three (3) years manufacture's warranty.
Technical information in this specification is subject to change without notice.
The revision of specification will be marked on the cover.
Technical information in this specification is subject to change without notice.
The revision of specification will be marked on the cover.