Adtran NV402E1 Manual Do Utilizador
Option Modules
NetVanta 1000/1000R Series Hardware Installation Guide
38
Copyright © 2007 ADTRAN, Inc.
61200500L1-34L
NetVanta T1/FT1 + DSX-1 NIM (P/N 1202863L1)
The T1/FT1 + DSX-1 NIM (see Figure 25) provides a T1 WAN interface for the NetVanta, a full or fractional
T1 network interface, and a DSX-1 interface. See the pinouts in Table A-6 on page 63 for the WAN-T1
connector, Table A-8 on page 64 for the DSX-1 connector, and Table A-14 on page 66 for the DBU connector
pinouts. An optional DIM is required for dial backup applications.
T1 network interface, and a DSX-1 interface. See the pinouts in Table A-6 on page 63 for the WAN-T1
connector, Table A-8 on page 64 for the DSX-1 connector, and Table A-14 on page 66 for the DBU connector
pinouts. An optional DIM is required for dial backup applications.
Figure 25. NetVanta T1/FT1 + DSX-1 NIM
WAN-T1
DSX-1
DBU
Features and Specifications
Operating Modes
•
Frame Relay, Multilink Frame Relay
•
PPP, Multilink PPP
•
HDLC
T1/FT1 Interface
•
Supported Standards: AT&T TR 62411,
AT&T TR 65016, ANSI T1.403,
Bellcore TR 194
AT&T TR 65016, ANSI T1.403,
Bellcore TR 194
•
Line Rate: 1.544 Mbps +75 bps
•
Line Code: AMI or B8ZS
•
Framing: D4 (SF) or ESF
•
FT1 Line Rate: DS0 channelized (multiples
of 56/64 kbps)
of 56/64 kbps)
•
Input Signal: 0 to -36 dB (DS1)
•
Line Build-Out: 0, -7.5, -15, -22.5 dB
(long), 0 to 655 ft (short)
(long), 0 to 655 ft (short)
•
DS0 Assignment: Programmable
•
Connector: RJ-48C
DSX-1 Interface
•
Line Interface: DSX-1 per ANSI T1.102
•
DSX Receiver Input Range: -10 dBdsx to
+6 dBdsx
+6 dBdsx
•
Line Rate: 1.544 Mbps
•
Capacity: 1 to 24 DS0s
•
Line Codes: AMI, B8ZS
•
DSX-1 Interface to PBX
•
Framing: D4 (SF) or ESF
•
Line Length: 0 to 655 feet and -7.5 dB
•
Connector: RJ-48C
Clock Source
•
Network
•
Internal
•
Through
Diagnostics
•
Test Pattern Generation and Detection:
511, QRSS, all ones, all zeros
511, QRSS, all ones, all zeros
•
Network loopbacks (local and remote);
responds to inband and FDL loop codes (T1
interface only)
responds to inband and FDL loop codes (T1
interface only)
•
Alarm generation and detection
•
Network and user sets of performance data
(15 minutes and 24 hours)
(15 minutes and 24 hours)
Compliance
•
•
ACTA/FCC Part 68
•
IC CS-03
•
UL/CUL 60950
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: Up to 95 percent,
noncondensing
noncondensing
Physical
•
Dimensions: 2.75-inch W x 4.25-inch D