Adtran TRC4206L1 Manual Do Utilizador
TRACER 4206 System Manual
Section 5, User Interface Guide
612804206L1-1A
© 2002 ADTRAN, Inc.
41
1.
NAVIGATING THE TERMINAL MENU
The TRACER 4206 menu system can be accessed with a VT100 compatible terminal set to 9600 bits per
second, 8 data bits, 1 stop bit, and no parity, connected to the RS-232 port located on the back of the unit.
Flow control on the serial interface should be configured to None for proper operation. Once a terminal is
connected, pressing <Ctrl + L> will refresh the current screen. If password access has been enabled, the
second, 8 data bits, 1 stop bit, and no parity, connected to the RS-232 port located on the back of the unit.
Flow control on the serial interface should be configured to None for proper operation. Once a terminal is
connected, pressing <Ctrl + L> will refresh the current screen. If password access has been enabled, the
E
NTER
P
ASSWORD
message will be displayed at the bottom of the TRACER 4206 system status menu.
Terminal Menu Window
The TRACER 4206 uses 11 (eleven) menu pages and a single main menu page to access its many features.
The main menu page (see Figure 1) provides a link to all available configuration/status pages.
The main menu page (see Figure 1) provides a link to all available configuration/status pages.
Figure 1. Main Menu Screen
All TRACER 4206 systems are shipped factory default with password protection disabled.
After connecting a VT100 terminal to the TRACER 4206, press <Ctrl + L> to redraw the
current screen.
current screen.