Adtran TRC4206L1 Manual Do Utilizador
Section 5, User Interface Guide
TRACER 4206 System Manual
48
© 2002 ADTRAN, Inc.
612804206L1-1A
>TRACER S
YSTEM
C
ONFIGURATION
> P
ASSWORD
E
NABLE
Configures password protection for the VT100 terminal interface. Password protection for the TRACER
4206 requires password input from the TRACER System Status menu page when connecting to the unit.
When configured for Password protection, the TRACER 4206 closes any terminal session that remains
inactive for more than 10 minutes. The TRACER 4206 comes factory programmed with
4206 requires password input from the TRACER System Status menu page when connecting to the unit.
When configured for Password protection, the TRACER 4206 closes any terminal session that remains
inactive for more than 10 minutes. The TRACER 4206 comes factory programmed with
P
ASSWORD
E
NABLE
set to
D
ISABLED
.
>TRACER S
YSTEM
C
ONFIGURATION
> P
ASSWORD
Sets the password for password protection of the TRACER 4206 VT100 terminal interface. Enter up to 8
alphanumeric characters. The system password is case sensitive.
alphanumeric characters. The system password is case sensitive.
>TRACER S
YSTEM
C
ONFIGURATION
> P
ERFORMANCE
S
TATS
(C
LEAR
)
Activator to reset all system error counters for the TRACER 4206.
>TRACER L
INK
P
ERFORMANCE
H
ISTORY
Figure 6 shows the TRACER Link Performance History menu page. The TRACER Link Performance
History menu page displays detailed error statistics and received signal level for the RF link (from both the
local and remote TRACER 4206 units) in 15-minute increments.
History menu page displays detailed error statistics and received signal level for the RF link (from both the
local and remote TRACER 4206 units) in 15-minute increments.
Figure 6. TRACER Link Performance History
The default password for the TRACER 4206 is tracer.