Adtran TRC6320 Manual Do Utilizador

TRACER 6000 Series Split System Manual

Section 3  Engineering Guidelines

612806320L1-1A

Copyright © 2005 ADTRAN, Inc.

31

The TRACER 6200 Indoor Unit (IDU) is 17.2-inch (43.7 cm) W, 11.4-inch (28.9 cm) D, and 1.7-inch

 

(4.4 cm) H, weighs 5 lbs (2.3 kg), and can be used in rackmount configurations. The Outdoor Unit (ODU) 
is 10.24-inch (26.01 cm) W, 4.78-inch (12.14 cm) D, and 12.74-inch (32.36 cm) H, weighs 9.5 lbs (4.3 kg), 
and can be mounted using standard U-bolts.

The TRACER 6000 Series system has a maximum power consumption of 25 W and a maximum current 
draw of 1.8 A (at 21 VDC).

The TRACER 6200 front panel contains an 

 monitoring interface, a 

 interface for reference

 

with RSSI, a 

 interface for factory use only, a DB-9 

 port for management and configuration, 

and an 

 interface (RJ-45) that provides an end-to-end serial port interface (at 9600 bps), and 

status LEDs to provide visual information about the TRACER system. Figure 1 identifies the various 
interfaces and the LEDs and Table 1 provides a brief description of each interface.

1

Detailed discussions (including pinouts) of front panel components (where applicable) follow the table.

RSSI

bantam

DC voltage indicating strength of the received signal at the 
antenna

Status LEDs

N/A

Visual status information about the system

GND

bantam

Ground reference for the RSSI interface

Test

3.5 mm mini-jack

Factory use only

AUX RS232

RJ-45

Serial interface for a 9600 bps connection between the 
local and remote systems over the RF link

CRAFT PORT

DB-9

RS-232 interface for connection to a VT100 terminal or PC 
with terminal emulation software