Adtran TRC6410L2X Manual Do Utilizador
Section 3 Engineering Guidelines
TRACER 6000 Series Integrated System Manual
34
Copyright © 2005 ADTRAN, Inc.
612806420L1-1D
AUX RS232 Interface (RJ-45)
The
AUX RS232
interface provides a female RJ-45 terminal connection (wired as a DCE interface), used
for a 9600 bps point-to-point connection between the local and remote systems (over the RF link). Table 3
shows the pinout.
shows the pinout.
PLAN A
Green (solid)
the TRACER is transmitting on Frequency Plan A.
Off
the TRACER is not transmitting on Frequency Plan A.
PLAN B
Green (solid)
the TRACER is transmitting on Frequency Plan B.
Off
the TRACER is not transmitting on Frequency Plan B.
RF LO
Red (solid)
the RSSI level is below suggested minimum threshold
(approximately 10 dBm above the minimum receive sensitivity).
(approximately 10 dBm above the minimum receive sensitivity).
RF DWN
Red (solid)
there is a communication problem between the local and remote
TRACERs.
TRACERs.
Table 3. AUX RS232 Pinout
Pin
Name
Source
Description
1
GND
Common
Signal ground
2
RTS
Attached Equipment
Request to send (unused)
3
TXDATA
Attached Equipment
Transmit data (from attached equipment)
4
DSR
TRACER
Data set ready
5
RXDATA
TRACER
Received data (to attached equipment)
6
CTS
TRACER
Clear to send
7
DTR
Attached Equipment
Data terminal ready (unused)
8
CD
TRACER
Carrier detect
Table 2. TRACER 64x0 LEDs (Continued)
For these LEDs...
This color light...
Indicates that...