Adtran TRC6420 Manual Do Utilizador
Section 5 User Interface Guide
TRACER 6420 System Manual
66
Copyright © 2005 ADTRAN, Inc.
612806420L1-1A
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> IP A
DDRESS
Lists the address assigned to the 10/100BaseT
MGMT
Ethernet port. This address is in dotted decimal
notation (four decimal numbers, each in the range of 0 to 255, separated by periods). This value is set to
192.168.0.1 by default. Obtain the correct IP address from your LAN administrator.
192.168.0.1 by default. Obtain the correct IP address from your LAN administrator.
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> N
ET
M
ASK
Defines which part of a destination IP address contains the network number. This address is in dotted
decimal notation (four decimal numbers, each in the range of 0 to 255, separated by periods). This value
decimal notation (four decimal numbers, each in the range of 0 to 255, separated by periods). This value
is set to
255.255.255.0
by default. This part of the destination IP address is used along with the
TRACER 6420 IP address to determine which nodes must be reached through the default IP gateway.
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> D
EFAULT
G
ATEWAY
Defines or changes the default gateway. You will need a default gateway if the LAN contains multiple
segments. This address is in dotted decimal notation (four decimal numbers, each in the range of 0 to 255,
separated by periods). This value is set to
segments. This address is in dotted decimal notation (four decimal numbers, each in the range of 0 to 255,
separated by periods). This value is set to
192.168.0.254
by default. Contact your LAN administrator for
the appropriate address.
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> MAC A
DDRESS
(Read Only) Displays the system Ethernet Media Access Control (MAC) address.
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> SNMP G
ET
C
OMMUNITY
Defines the community name for Get access (to poll the TRACER 6420 for status information). This value
must match the Get name defined on the network management stations (NMS). Get access is read only
access. The default name is public.
must match the Get name defined on the network management stations (NMS). Get access is read only
access. The default name is public.
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> SNMP P
UT
C
OMMUNITY
Defines the community name for Set access (to change TRACER 6420 configuration parameters through
SNMP). This value must match the Get or Set name defined on the NMS. The default name is private.
SNMP). This value must match the Get or Set name defined on the NMS. The default name is private.
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> SNMP T
RAP
C
OMMUNITY
Defines the community name for trap destinations. This name must match the community name defined on
the NMS. The default name is SNMP_trap.
the NMS. The default name is SNMP_trap.
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> SNMP T
RAP
H
OST
#0 - #4
Identifies the IP address in dotted decimal notation of the NMS for the TRACER 6420 to send SNMP traps
to. Up to five trap destinations can be entered.
to. Up to five trap destinations can be entered.