Murata Electronics North America DM1810A Manual Do Utilizador
2
Theory of Operation
The major components of the DM1810-916MB include
an RFM TR8100 ASH transceiver and a Microchip
PIC16F689 microcontroller. The TR8100 operates on
a frequency of 916.50 MHz, at a nominal output power
of 10 mW.
an RFM TR8100 ASH transceiver and a Microchip
PIC16F689 microcontroller. The TR8100 operates on
a frequency of 916.50 MHz, at a nominal output power
of 10 mW.
The 16F689 provides a 9.6 kb/s serial interface for
communication with a host microcontroller. A compan-
ion interface board, the IM1800, is available with USB
bridge circuitry to interface the DM1810-916MB to a
host PC. The DM1810 includes two LEDs that indicate
the module’s operating mode.
communication with a host microcontroller. A compan-
ion interface board, the IM1800, is available with USB
bridge circuitry to interface the DM1810-916MB to a
host PC. The DM1810 includes two LEDs that indicate
the module’s operating mode.
The DM1810-916MB firmware is based on Cirronet’s
miniMESH network protocol, which utilizes time-syn-
chronized redundant routing to provide robust, deter-
ministic packet delivery though a network with up to 15
routers. Network configuration and maintenance fea-
tures are built into the miniMESH protocol, simplifying
commissioning and operating logistics. The firmware
also includes several sleep cycling methods for ex-
tended battery life operation.
miniMESH network protocol, which utilizes time-syn-
chronized redundant routing to provide robust, deter-
ministic packet delivery though a network with up to 15
routers. Network configuration and maintenance fea-
tures are built into the miniMESH protocol, simplifying
commissioning and operating logistics. The firmware
also includes several sleep cycling methods for ex-
tended battery life operation.
Please refer to the DM1810 User’s Guide and the
AN1810 series Application Notes for installation and
application programming information. See Cirronet’s
web site at www.Cirronet.com.
AN1810 series Application Notes for installation and
application programming information. See Cirronet’s
web site at www.Cirronet.com.
DM1810-916MB FCC Certification
The DM1810-916MB hardware has been certified for
operation under FCC Part 15 Rules, Section 15.247.
The antenna(s) used for this transmitter must be in-
stalled to provide a separation distance of at least
20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or
transmitter.
operation under FCC Part 15 Rules, Section 15.247.
The antenna(s) used for this transmitter must be in-
stalled to provide a separation distance of at least
20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or
transmitter.
FCC Notices and Labels
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference re-
ceived, including interference that may cause unde-
sired operation.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference re-
ceived, including interference that may cause unde-
sired operation.
A clearly visible label is required on the outside of the
user’s (OEM) enclosure stating that this product con-
tains a DM1810-916MB transceiver assembly, FCC
ID: HSW-DM1810A. WARNING: This device oper-
ates under Part 15 of the FCC rules. Any modification
to this device, not expressly authorized by Cirronet,
Inc., may void the user’s authority to operate this de-
vice.
user’s (OEM) enclosure stating that this product con-
tains a DM1810-916MB transceiver assembly, FCC
ID: HSW-DM1810A. WARNING: This device oper-
ates under Part 15 of the FCC rules. Any modification
to this device, not expressly authorized by Cirronet,
Inc., may void the user’s authority to operate this de-
vice.
T X M O D
R X D A T A
C N T R L 1
C N T R L 0
P I C
1 6 F 6 8 9
µ P
D M 1 8 1 0 - 9 1 6 M B B l o c k D i a g r a m
L E D 1
L E D 2
T R 8 1 0 0
A S H
T r a n s c e i v e r
G N D
S E R I A L T X
S E R I A L R X
B I N D
G N D
V O U T
V I N
3 V
R e g
G N D
G N D
J 1 - 1
J 1 - 2
J 1 - 3
J 1 - 4
J 1 - 5
J 1 - 6
J 1 - 7
J 1 - 8
J 1 - 9
J 1 - 1 0
J 3 - 2
J 3 - 1
J 3 - 3
R S S I
J 4 - 1
J 4 - 2
J 4 - 2
D 1
D 2
D 2
Figure 1