Murata Electronics North America SEM2410 Manual Do Utilizador

 





13 022101 

echo 

Toggles user screen echo mode 

help 

Displays command help screen 

reset 

Resets the SEM activating changed configuration 
parameters 

save 

Stores current configuration to memory 

sys [help 

 outmax 

[1..208] 

Displays help screen for command 

Sets the maximum packet length 

version 

Diplays SEM firmware version 

 
echo 

Toggles the user screen mode to echo characters typed by the user. Default is 
on. If echo is turned off, characters typed will not be displayed on the screen 
unless echoed by the terminal program. 

help 

Displays a list of all the SEM commands. Most commands that require a 
parameter also have a help mode that displays the help screen for that 
command. 

reset 

Resets the SEM and loads saved parameters into active memory. Also causes 
the SEM to reinitialize which can take 30 seconds. If reset is issued before 
the save command, the new parameters are lost and the last saved parameters 
are used. 

save 

Saves changed parameters in non-volatile memory to be loaded on power up. 
Must be issued before the reset command or cycling power to have changed 
parameters take effect. (An exception is the sys outmax command which 
becomes active immediately after it is entered.) 

sys outmax Sets the length in bytes of the packets the processor in the master SEM will 

send to the internal radio. Setting this parameter in a slave device has no 
effect.  

version 

Displays the SEM firmware version.