Murata Electronics North America Z2405HPA Manual Do Utilizador
ZMN2405/ZMN2405HP Dev Kit
© 2007-2008 RFM Inc.
25
M-2405-0000 Rev. C-
ZBDemo works the same whether connecting to an RS-232 serial port or a USB port. On most
computers, the USB Comm Ports have higher port numbers than RS-232 ports. Even on
computers without an RS-232 serial port, the USB Comm Ports are numbered something other
than 1 or 2. If a USB port is to be used, the drivers for the USB adapters must be installed on
the PC.
The USB drivers are on the Documentation and Software CD under the Drivers folder. When
the computer detects the presence of the hardware, the “Add New Hardware Wizard” box will
appear. Click on “Next.” The next dialog box will ask what Windows should do. Click on the
“Search for the best driver for your device” button and then click on “Next.” The next dialog box
will ask where Windows should search for the driver. Put the included software CD in the
computer and enter the drive letter for your CD drive. Click on the “Browse” button to the right of
the window. A window will pop up displaying the contents of the CD. Double-click on the folder
named “Drivers.” Click the “Next Button.”
Windows will indicate it has found the driver FTDIBUS.INF on the diskette. Click on the “Next”
button to begin the driver installation. When Windows has finished the installation the messages
“USB High Speed Serial Converter” and “Windows has finished installing the software that your
new hardware device requires” will be displayed. Click on the “Finished” button to close the
Wizard.
When ZBDemo has established a connection with a radio, the information for that radio will be
displayed in the Local Radio column as shown below.
computers, the USB Comm Ports have higher port numbers than RS-232 ports. Even on
computers without an RS-232 serial port, the USB Comm Ports are numbered something other
than 1 or 2. If a USB port is to be used, the drivers for the USB adapters must be installed on
the PC.
The USB drivers are on the Documentation and Software CD under the Drivers folder. When
the computer detects the presence of the hardware, the “Add New Hardware Wizard” box will
appear. Click on “Next.” The next dialog box will ask what Windows should do. Click on the
“Search for the best driver for your device” button and then click on “Next.” The next dialog box
will ask where Windows should search for the driver. Put the included software CD in the
computer and enter the drive letter for your CD drive. Click on the “Browse” button to the right of
the window. A window will pop up displaying the contents of the CD. Double-click on the folder
named “Drivers.” Click the “Next Button.”
Windows will indicate it has found the driver FTDIBUS.INF on the diskette. Click on the “Next”
button to begin the driver installation. When Windows has finished the installation the messages
“USB High Speed Serial Converter” and “Windows has finished installing the software that your
new hardware device requires” will be displayed. Click on the “Finished” button to close the
Wizard.
When ZBDemo has established a connection with a radio, the information for that radio will be
displayed in the Local Radio column as shown below.