Murata Electronics North America Z2405HPA Manual Do Utilizador
ZMN2405/ZMN2405HP Dev Kit
© 2007-2008 RFM Inc.
27
M-2405-0000 Rev. C-
the switches are closed, the window will display
0x00
. Note that ZBDemo will not update
changes in either the Local Radio or the remote Radios until the Refresh is started by clicking
on the Start button under the Refresh Delay window.
on the Start button under the Refresh Delay window.
5.4 GPIO LEDs
The LED0 and LED1 windows allow the GPIO2 and GPIO3 module lines to be driven high or
low to turn the LEDs on or off respectively. The LEDs are turned on by entering 1 in the window
and turned off by entering a 0 in the window. As before, ZBDemo will not update changes in
either the Local Radio or the remote Radios until the Refresh is started by clicking on the Start
button under the Refresh Delay window.
low to turn the LEDs on or off respectively. The LEDs are turned on by entering 1 in the window
and turned off by entering a 0 in the window. As before, ZBDemo will not update changes in
either the Local Radio or the remote Radios until the Refresh is started by clicking on the Start
button under the Refresh Delay window.
5.5 Thermistor, Potentiometer and Analog to Digital Inputs
The Thermistor window displays the 10-bit ADC reading of the ADC X channel. Changes in
temperature will cause the value displayed to change if ZBDemo has been put into update
mode by clicking on the Start button under the Refresh Delay window. Similarly, the
Potentiometer window displays the resultant 10-bit ADC value of the voltage divider created by
the pot. Changing the voltage by adjusting the pot will change the value displayed in the window
if ZBDemo is refreshing the data as above. The potentiometer and thermistor can be removed
from the circuit by removing the headers from JP3 and JP4 respectively.
temperature will cause the value displayed to change if ZBDemo has been put into update
mode by clicking on the Start button under the Refresh Delay window. Similarly, the
Potentiometer window displays the resultant 10-bit ADC value of the voltage divider created by
the pot. Changing the voltage by adjusting the pot will change the value displayed in the window
if ZBDemo is refreshing the data as above. The potentiometer and thermistor can be removed
from the circuit by removing the headers from JP3 and JP4 respectively.
5.6 Digital to Analog Outputs
The PWMA and PWMB windows allow adjusting the duty cycle of the PWM outputs. These
outputs are fed into an RC network for low pass filtering to generate an analog voltage. The
allowable values are
outputs are fed into an RC network for low pass filtering to generate an analog voltage. The
allowable values are
0x0000
to
0xFFFF
.
5.7 Children’s Network List
Coordinators and Routers can be parents to other devices in the network. The Coordinator will
always have children as long as there is at least a second device in the network. Routers may
or may not have any children and End Devices cannot have children. The drop down menu will
display the network address of all children associated with the radio in that column.
always have children as long as there is at least a second device in the network. Routers may
or may not have any children and End Devices cannot have children. The drop down menu will
display the network address of all children associated with the radio in that column.