Murata Electronics North America 2832 Manual Do Utilizador
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. October 2017
MBN52832 Data Sheet, v1.1, 06/14/2018
MBN52832 Data Sheet, v1.1, 06/14/2018
Page 33 of 34
www.murata.com
Products are designed to work for electronic products under normal environmental conditions (ambient temperature,
humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above-
mentioned. However, if products are used under the following circumstances, it may damage products and leakage of
electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).
- In an atmosphere containing combustible and volatile gases.
- Dusty place.
- Direct sunlight place.
- Water splashing place.
- Humid place where water condenses.
- Freezing place.
If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use.
As it might be a cause of degradation or destruction to apply static electricity to products, do not apply static electricity or
excessive voltage while assembling and measuring.
humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above-
mentioned. However, if products are used under the following circumstances, it may damage products and leakage of
electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).
- In an atmosphere containing combustible and volatile gases.
- Dusty place.
- Direct sunlight place.
- Water splashing place.
- Humid place where water condenses.
- Freezing place.
If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use.
As it might be a cause of degradation or destruction to apply static electricity to products, do not apply static electricity or
excessive voltage while assembling and measuring.
15.6 Input Power Capacity
Products shall be used in the input power capacity as specified in this specification.
Inform Murata beforehand, in case that the components are used beyond such input power capacity range.