ZyXEL Communications Corporation AMG1312T10B Manual Do Utilizador

Chapter 14 Filters

AMG1312-T Series User’s Guide

Security > Filter > IP/MAC Filter

The following table describes the labels in this screen.

Security > Filter > IP/MAC Filter

Rule Type

Rule Type selection

Select White List to specify traffic to allow and Black List to specify traffic to 
disallow.

IP / MAC Filter Rule Editing

IP / MAC Filter Rule Index

Select the index number of the filter rule.

Active

Use this field to enable or disable the filter rule.

Interface

Select the PVC to which to apply the filter.

Direction

Apply the filter to Incoming or Outgoing traffic direction.

Rule Type

Select IP or MAC type to configure the rule.

Use the IP Filter to block or allow traffic by IP addresses.

Use the MAC Filter to block or allow traffic by MAC address.

Source IP Address

Enter the source IP address of the packets you wish to filter. This field is 
ignored if it is 0.0.0.0.

Subnet Mask

Enter the IP subnet mask for the source IP address

Port Number

Enter the source port of the packets that you wish to filter. The range of this 
field is 0 to 65535. This field is ignored if it is 0.

Destination IP Address

Enter the destination IP address of the packets you wish to filter. This field is 
ignored if it is 0.0.0.0.