ZyXEL Communications Corporation AMG1312T10B Manual Do Utilizador
Chapter 14 Filters
AMG1312-T Series User’s Guide
166
14.3 IPv6/MAC Filter
Use this screen to create and apply IPv6 filters. Click Security > Filter > IPv6/MAC Filter. The
screen appears as shown.
screen appears as shown.
Figure 83
Security > Filter > IPv6/MAC Filter
The following table describes the labels in this screen.
Table 63
Security > Filter > IPv6/MAC Filter
LABEL
DESCRIPTION
Rule Type
Rule Type selection
Select White List to specify traffic to allow and Black List to specify traffic to
block.
block.
IPv6 / MAC Filter Rule Editing
IPv6 / MAC Filter Rule Index
Select the index number of the filter rule.
Active
Use this field to enable or disable the filter rule.
Interface
Select the PVC to which to apply the filter.
Direction
Apply the filter to Incoming or Outgoing traffic direction.
Rule Type
Select IP or MAC type to configure the rule.
Use the IP Filter to block or allow traffic by IPv6 addresses.
Use the MAC Filter to block or allow traffic by MAC address.
Source IP Address
Enter the source IPv6 address of the packets you wish to filter. This field is
ignored if it is ::.
ignored if it is ::.
Source Prefix Length
Enter the prefix length for the source IPv6 address
Destination IPv6 Address
Enter the destination IPv6 address of the packets you wish to filter. This field is
ignored if it is ::.
ignored if it is ::.