ZyXEL Communications Corporation X150N Manual Do Utilizador
• IEEE 802.11b or 802.11g operation of this product in the United States of America is
firmware limited to channel 1 through 11.
• To comply with FCC RF exposure compliance requirements, a separation distance of
at least 20 cm must be maintained between the antenna of this device and all
persons.
persons.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following to two conditions:
following to two conditions:
This device may not cause interference and
This device must accept any interference, including interference that may cause undesired
operation of the device.
operation of the device.
This device has been designed to operate with an antenna having a maximum gain of 2 dBi.
Antenna having a higher gain is strictly prohibited per regulation s of Industry Canada. The
required antenna impedance is 50 ohms.
required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the EIRP is not more than required for successful communication.
be so chosen that the EIRP is not more than required for successful communication.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20
cm between the radiating device and your body.
environment. This equipment should be installed and operated with minimum distance 20
cm between the radiating device and your body.