Scosche Industries BT100 Manual Do Utilizador

Button Functions

Phone button

- When playing music, press and release to pause 

music; press and release again to play music.

-  When receiving an incoming call, press and 

release to answer; press and release to end the 

call.

- Press twice quickly to call the last 

number dailed.

Note: When playing music and a call comes in, the 

music will pause and you will hear a ringtone.  

The music will resume when the call is ended. 

Volume up/track forward

-  Press to play next track

-  Press and hold to raise volume

Volume down/track back

-  Press to play previous track

-  Press and hold to lower volume
Note: The button functions may vary per device.

Charging 

Note: Make sure your BT100 is fully charged 

before using it for the first time.

-  Gently plug the Micro-USB end of the included 

charging cable into the charge port of the 

control box.

-  Plug the USB end of the cable into a powered 

USB port, such as a computer, laptop, or a USB 

AC adapter (not included).

-  The LED indicator located on the control box will 

glow red.  Once the headset is fully charged, the 

LED power indicator will turn off. 

Note 

- The LED indicator will light up red while charging 

even if the BTE01 is off.

- You cannot charge your BT100 while listening to 

music.

Connect via Bluetooth

®

 

(first time set-up) 

Note: Adjust the volume of your device and 

the BT100 to a comfortable volume 

before use.

-  Move the power swithc on the side of the BT100 

to the “ON” position.  The LED indicator light on 

the control box will flash blue.

-  Open the settings on your Bluetooth device 

(Bluetooth must be enabled).

-  Select “SCOSCHE BT100” from the list of Bluetooth 

devices.

-  Once paired, the LED indicator light will flash 

blue slowly.

-  To turn off the BT100, move the power switch on 

the side to the “OFF” position.

Controls

LED indicator

Microphone

Volume up/

track forward

Volume down/

track back

Phone

button

Micro

USB port