Справочник Пользователя для Scosche Industries BT100
Button Functions
Phone button
- When playing music, press and release to pause
music; press and release again to play music.
- When receiving an incoming call, press and
release to answer; press and release to end the
call.
- Press twice quickly to call the last
number dailed.
Note: When playing music and a call comes in, the
music will pause and you will hear a ringtone.
The music will resume when the call is ended.
Volume up/track forward
- Press to play next track
- Press and hold to raise volume
Volume down/track back
- Press to play previous track
- Press and hold to lower volume
Note: The button functions may vary per device.
Note: The button functions may vary per device.
Charging
Note: Make sure your BT100 is fully charged
before using it for the first time.
- Gently plug the Micro-USB end of the included
charging cable into the charge port of the
control box.
- Plug the USB end of the cable into a powered
USB port, such as a computer, laptop, or a USB
AC adapter (not included).
- The LED indicator located on the control box will
glow red. Once the headset is fully charged, the
LED power indicator will turn off.
Note
- The LED indicator will light up red while charging
even if the BTE01 is off.
- You cannot charge your BT100 while listening to
music.
Connect via Bluetooth
®
(first time set-up)
Note: Adjust the volume of your device and
the BT100 to a comfortable volume
before use.
- Move the power swithc on the side of the BT100
to the “ON” position. The LED indicator light on
the control box will flash blue.
- Open the settings on your Bluetooth device
(Bluetooth must be enabled).
- Select “SCOSCHE BT100” from the list of Bluetooth
devices.
- Once paired, the LED indicator light will flash
blue slowly.
- To turn off the BT100, move the power switch on
the side to the “OFF” position.
Controls
LED indicator
Microphone
Volume up/
track forward
Volume down/
track back
Phone
button
Micro
USB port