Hughes Network Systems 24SX-001 Manual Do Utilizador
1027144– 0001 Revision D
7–16 Commissioning the RT
RT installation
Check the status of the ODU as follows:
1.
From the
Status / SSI 1
display, shown below,
Status
SSI 1
SSI 1
press NEXT to scroll to the ODU status menu:
Status
ODU
ODU
2.
Press ENTER to show the ODU status:
ODU
OK
OK
The possible status conditions for the ODU are:
OK
Degraded
Failed
Unknown
Degraded
Failed
Unknown
(as explained on page 7–14)
Note:
You will not see ODU status information if the ODU
is not connected (via the IFL) to the IDU. The status will be
Unknown
.
If a failure is indicated for any component, replace the failed
component. Run SUDS, and check the status of the new
component.
component. Run SUDS, and check the status of the new
component.
3.
Exit the Status menu: Scroll to:
Status
Exit
Exit
and then press ENTER.
4.
Exit the Main Menu: Scroll to:
Main Menu
Exit
Exit
and then press ENTER.
Check ODU status