Hughes Network Systems HNS9211 Manual Do Utilizador
Using the Web UI
3500988-0001 Revision 1.0
27
Manage Contexts
The Manage Contexts page under the Connections icon allows
the user to setup and configure PDP contexts (data connections)
for any TE that is connected to the UT. It also shows you all
current Active Connections.
the user to setup and configure PDP contexts (data connections)
for any TE that is connected to the UT. It also shows you all
current Active Connections.
Open a New Connection field - To open a new connection,
select the row and enter the required data:
select the row and enter the required data:
Owner – Your current IP address is shown by default (.101), but
you can change it to control connections for any other device
connected to the terminal. The page automatically displays
entries for all detected devices and these entries can be selected
to activate connections for those devices.
you can change it to control connections for any other device
connected to the terminal. The page automatically displays
entries for all detected devices and these entries can be selected
to activate connections for those devices.
Service - Select the service that you want by clicking on the
down arrow. The drop down list shows all of the different QoS
types: Standard, Streaming 32K, Streaming 64K, Streaming
128K, X-Stream, ½ HDR and Full HDR. Select the appropriate
service required.
down arrow. The drop down list shows all of the different QoS
types: Standard, Streaming 32K, Streaming 64K, Streaming
128K, X-Stream, ½ HDR and Full HDR. Select the appropriate
service required.
APN - The APN is read from the SIM card, but if you have other
APNs defined (go to the Manage APNs page), you can use the
down arrow to select a different APN.
APNs defined (go to the Manage APNs page), you can use the
down arrow to select a different APN.
Username/Password: Some Service Providers require a
username and password to be used when setting up a connection.
This is often required when using Static Global IP addresses
assigned by the Service provider. If this information is required,
username and password to be used when setting up a connection.
This is often required when using Static Global IP addresses
assigned by the Service provider. If this information is required,