Hughes Network Systems HNS9211 Manual Do Utilizador

Página de 75
 Using the Web UI  
3500988-0001  Revision 1.0 
29 
 
Automatic Contexts 
This web page allows you to use Automatic Context Activation 
(ACA) in two different ways;  
 One way is to use a static IP addresses in the TE device so 
you can establish an automatic PDP context with any QoS 
that is offered by the network (upper half of the web page). 
 The second way is to use DHCP IP addresses so you can 
establish an automatic standard PDP context for any TE that 
connects via DHCP to the UT (lower part of the web page). 
 There are also two ways to set the ACA whether you choose 
Static or DHCP.  You can choose whether the context should 
be activated as soon as the UT detects the device (“ON”), or 
if the context should only be activated when the TE attempts 
to send data to the satellite link (“Data”): 
“Always ON”: Select ON in the drop down menu 
if you want the context to be On all the time. 
“Data”: Select Data if you want the context to be 
activated when the TE attempts to send data to the 
satellite link  
 
 
When using “Data” ACA, if the context is ever deactivated, it 
will be reactivated when more data is sent. 
The “On” option will always reactivate the context if it is 
deactivated, even if data is not sent by the TE.  
 
Static IP Automatic Contexts: You can configure your own 
range of static IP addresses and QoS’s to use with a static 
automatic context.   
To turn on a particular range of static addresses, select “On” or 
“Data” from the drop down list and choose a range of addresses, 
low and high to use (e.g. 192.168.128.200 to 192.168.128.202) 
or you can leave the defaults (192.168.128.200 to 
192.168.128.209). 
Next, select the desired QoS for that range of IP addresses (e.g. 
Standard).  The APN listed is the default APN read from the 
SIM card (bgan.inmarsat.com).  If your SIM is provisioned for 
more than one APN, then you can select a secondary APN from 
the drop down list.