Wi Lan Inc EB03 Manual Do Utilizador
Radio Module Configuration
JUL 2001 Rev 03
69
Radio Module Configuration
The Radio Module Configuration menu is used to change several key parameters, including station type,
station rank and security passwords. Because these settings can affect service, they are changed in three
progessive stages: new, current, and flash. (New and current are for temporary storage, while flash is for
long-term storage.) The general procedure for changing settings with the Radio Module Configuration menu
follows.
station rank and security passwords. Because these settings can affect service, they are changed in three
progessive stages: new, current, and flash. (New and current are for temporary storage, while flash is for
long-term storage.) The general procedure for changing settings with the Radio Module Configuration menu
follows.
1.
View the current Radio Module Configuration menu. See
2.
Select Config Test Minutes. To begin, enter a time of 15–20 minutes. See
3.
Select a parameter and, if necessary, change the value in the "New" column.
4.
After making changes, select Reboot New RF Configuration and press Enter. The unit reboots
and the "New" settings become the "Current" settings of the unit. See
and the "New" settings become the "Current" settings of the unit. See
5.
If the unit operates as expected, you can save the current settings to "Flash". See
If current settings do not operate as expected, do not save them to "Flash". Change the current settings
or wait for the Config Test Minutes time period to expire. At expiry, the unit will automatically
reboot and revert to the last-saved flash memory settings. See
or wait for the Config Test Minutes time period to expire. At expiry, the unit will automatically
reboot and revert to the last-saved flash memory settings. See
Viewing the Radio Module Configuration
➧
To view the current radio module configuration
1.
From the Main Menu, select Radio Module Configuration and press
Enter
. The Radio Module
Configuration menu is displayed.
Radio Module Configuration
New Current Flash
Station Type Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) 1 1 1
Center Frequency 2.4400 GHz 2.4400 GHz 2.4400 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 0 0 0
Config Test Minutes (1-120) 30 30 30
Tx Power Level Adjust -> 0 dB 0 dB 0 dB
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1 1 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) 0 0 0
Reboot New RF configuration Press Enter to Execute
Save Current Config to Flash Press Enter to Execute