Itron Inc. CCU100A Manual Do Utilizador
Materials Not Provided by Itron
TDC-0971-011 CCU 100 and Repeater 100 Installation Guide
15
Proprietary and Confidential
Remote Mount High Gain (8.15dBi) 900MHz Antenna on a Standard
Collector or Repeater
Collector or Repeater
Warning Do not install an 8.15 dBi antenna directly on the CCU/repeater.
Antenna installation directly on the CCU will compromise mechanical
integrity and will not meet the compliance requirement for a loss of 2.2 dB
between the CCU/repeaters and the 8.15 dBi antenna.
Antenna installation directly on the CCU will compromise mechanical
integrity and will not meet the compliance requirement for a loss of 2.2 dB
between the CCU/repeaters and the 8.15 dBi antenna.
The following Coaxial Specifications table lists several options for coaxial cable that can
be used with the remote mount high gain 900 MHz antenna. When a high gain antenna is
installed on a standard collector or repeater, follow the FCC set limits for the maximum
transmit power of the collector or repeater. To meet FCC limits, standard collectors or
repeaters must have a minimum of 2.2 dB worth of loss (but not more than 3.5 dB)
between the collector or repeater and the antenna.
be used with the remote mount high gain 900 MHz antenna. When a high gain antenna is
installed on a standard collector or repeater, follow the FCC set limits for the maximum
transmit power of the collector or repeater. To meet FCC limits, standard collectors or
repeaters must have a minimum of 2.2 dB worth of loss (but not more than 3.5 dB)
between the collector or repeater and the antenna.
Allow 0.1 dB loss for each connector. If required, you may use a 1 dB attenuator (similar
to the Pasternack PE7002-1) to attain the desired power at the antenna for short coaxial
cable runs.
to the Pasternack PE7002-1) to attain the desired power at the antenna for short coaxial
cable runs.
Remote Mount High Gain (8.15 dBi) 900 MHz Antenna on a Tower
CCU
CCU
The following Coax Specification table lists several options for coaxial cable that can be
used with the remote mount high gain 900 MHz antenna. When a high gain antenna is
installed on a tower collector, follow the FCC set limits for the maximum transmit power
of the collector. To meet these limits, tower collectors with FCC ID number
EO9CCU100T must have a minimum of 2.2 dB worth of loss (but not more than 3.5 dB)
between the tower cabinet and the antenna. Install all other tower collectors with
minimum cable loss.
used with the remote mount high gain 900 MHz antenna. When a high gain antenna is
installed on a tower collector, follow the FCC set limits for the maximum transmit power
of the collector. To meet these limits, tower collectors with FCC ID number
EO9CCU100T must have a minimum of 2.2 dB worth of loss (but not more than 3.5 dB)
between the tower cabinet and the antenna. Install all other tower collectors with
minimum cable loss.
Allow 0.1 dB loss for each connector. If required, you may use a 1 dB attenuator (similar
to the Pasternack PE7002-1) to attain the desired power at the antenna.
to the Pasternack PE7002-1) to attain the desired power at the antenna.
Total Coaxial length
Coax Specification
0-120 ft.
121-200 ft. (high-gain
antenna only)
antenna only)
201-250 ft. (high-gain
antenna only)
antenna only)
Standard black jacket cable
AVA5-50
AVA6-50
AVA7-50
Optional fire retardant cable
AVA5RK-50
AVA6RK-50
AVA7RK-50
Cable diameter (nominal)
7/8 in.
1-1/4 in.
1-5/8 in.
Cable weight (lb./ft.)
0.33
0.46
0.70
Minimum bend radius
10 in.
8 in.
15 in.
Cable attenuation @ 915 MHz
~ 1.2 dB/100 ft.
~ 0.84 dB/100 ft.
~0.70 dB/100 ft.