Garmin AT Inc. SL-70 Manual Do Utilizador
Installation
6
Apollo SL70 Installation Manual
The altitude source must be accurate to within
±
125 feet, 95% probability, and have a
resolution of 100 feet (the serial input resolution may be better than 100feet).
A
NTENNA
The antenna shall be a standard transponder quarter wave monopole antenna, such as the TED
#104-12 or Comant CI-101.
#104-12 or Comant CI-101.
E
QUIPMENT
M
OUNTING
Once the cable assemblies have been made, attach the 37 pin dsub and coaxial cable
connectors to the rear connector mounting plate and the mounting frame as illustrated in
Figure 2 and Figure 3. Route the wiring bundle as appropriate. The rear connector plate should
be attached to the mounting frame before installing the frame in the instrument panel. The rear
connector plate can be used to tie down the cable assemblies. Connect the shields on any
shielded cables directly to the connector mounting plate.
connectors to the rear connector mounting plate and the mounting frame as illustrated in
Figure 2 and Figure 3. Route the wiring bundle as appropriate. The rear connector plate should
be attached to the mounting frame before installing the frame in the instrument panel. The rear
connector plate can be used to tie down the cable assemblies. Connect the shields on any
shielded cables directly to the connector mounting plate.
Figure 2 Mounting Frame Assembly