CALAMP WIRELESS NETWORKS INC. BDP3-AET Manual Do Utilizador

 
 

120 20191-002 

 Paragon-III Technical Manual

 

The Exciter’s front panel controls and indicators are: 
•  Carrier Switch - momentarily keys the transmitter ON while 

pressed (used for test purposes only). 

•  On LED - is lit when transmitting 
•  Line Sensitivity – not used. 
•  Supply LED - is lit when DC power is applied. Fast Flashes 

when linked with PGM800Win. Slow Flashes indicates VCO 
(synthesizer) out of lock. Unequal Flashes indicates internal 
communication error. 

•  Microphone Socket – not used.  

 
 
 
 
 
 

 
 
 

There are no PA front panel controls and 
indicators. The front panel only has the 
grills for the input of the airflow used to 
cool the heat sink, while it is not 
mechanically attached to the PA module.  

The rear side of the PA module yields 
access to the screws that lock the module 
onto the base station frame and the 4 
connectors of the PA module as follows: 

N-female – RF output connector.(supplies 
10-50W RF power, for a fixed gain of 10dB 
over the input power) 

BNC female – RF input connector (1-5W 
input power from the exciter)  

Molex power socket – two-wired socket for 
the main PA power lines (12.3V/25A) 

DB9 female – connector for the power lines of the fans (1&5) and the control of PA enable line. 

 

Carrier 

Switch 

On 

LED 

Supply 

LED 

Line 

Sensitivity 

Microphone 

Socket 

®

Exciter

Carrier

On

Line

Sensitivity

Supply

Microphone

®