CALAMP WIRELESS NETWORKS INC. BDP3-AMP Manual Do Utilizador
120 20191-100a
Paragon-III User Manual
18
4.3 IP Network Settings
4.3.1 IP Network Settings (with Host)
Referring to Figure 15 below, set the Paragon-III base station. Set the “Data” port Eth1 IP addresses (for
“Setup” port set Eth2) and IP netmask of both Base and Mobile(s).
“Setup” port set Eth2) and IP netmask of both Base and Mobile(s).
Keep the RF IP setting as is, providing customer is not using the 10.0.0.0 IP network.
Add routes in the Host (route add…)
In the illustration, Host and PC are part of different IP subnet.
Figure 15 - IP Network Settings in Router Mode (with Host)
4.3.2 IP Network Settings (with Router)
Referring to Figure 19 below, set the Paragon-III base station. Set the “Data” port Eth1 IP addresses (for
“Setup” port set Eth2) and IP netmask of both Base and Mobile(s).
“Setup” port set Eth2) and IP netmask of both Base and Mobile(s).
Figure 16 - IP Network Settings in Router Mode (with Router)
Paragon-III Base
DATA:
Eth1 IP: 192.168.202.1
MASK: 255.255.255.0
RF IP: 10.0.0.1
MASK: 255.0.0.0
Mobile
DHCP Server
RF IP: 10.0.0.2
MASK: 255.0.0.0
Eth1 IP: 192.168.201.1
MASK: 255.255.255.0
RF Network
Host
IP: 192.168.202.2
MASK: 255.255.255.0
route add 192.168.201.0 mask 255. 255. 255.0 192.168.202.1
route add 10.0.0.0 mask 255.0.0.0 192.168.202.1
route add 10.0.0.0 mask 255.0.0.0 192.168.202.1
PC
DHCP Client
SETUP:
Eth2 IP: 192.168.203.1
MASK: 255.255.255.0
Paragon-III Base
DATA:
Eth1 IP: 192.168.202.1
MASK: 255.255.255.0
Gateway: 192.168.202.2
RF IP: 10.0.0.1
MASK: 255.0.0.0
Mobile
DHCP Server
NAT
RF IP: 10.0.0.2
MASK: 255.0.0.0
Eth1 IP: 192.168.201.1
MASK: 255.255.255.0
RF Network
Router
IP: 192.168.202.2
MASK: 255.255.255.0
route add 10.0.0.0 mask 255.0.0.0 192.168.202.1
PC
DHCP Client
SETUP:
Eth1 IP: 192.168.203.1
MASK: 255.255.255.0
Gateway: 192.168.202.2
Host