CALAMP WIRELESS NETWORKS INC. BDP4-EXT8 Manual Do Utilizador

•  2x Ethernet LEDs (status & activity) 
•  USB port – reserved. 
The option for 10 MHz Disciplined Clock of the Paragon 4 requires a GPS antenna kit assembly
and a board that is to be used as a piggyback on the BSC2 motherboard. The 10 MHz Disciplined
Clock board is equipped with a GPS module (Garmin GPS15L-F) and a 10MHz TCVCXO (tem-
perature controlled voltage controlled crystal oscillator). The 10Mhz oscillator is disciplined (or
locked to) by the 1 PPS output of the GPS module.

In Lock mode (when synchronized to GPS 1pps signal), the BSC provides a reference signal of

10MHz that has the accuracy better than 1ppb  (± 0.010 Hz at 10 MHz). 

If the GPS reference is not available, in “unlock” mode the accuracy is only better than 5ppm

(±50 Hz at 10 MHz). Anyway, if an external reference of 10MHz is provided, this reference signal is
buffered for the other modules of the Paragon 4 base station. 

The BSC will not supply the 10MHz reference without the option. 

The speaker panel is fitted with a 4

Ω speaker.