Ione RFSCORPIUSP20U Manual Do Utilizador

receiver will start to blink.

Step 3: Within 8 seconds, please press the “connect” on the keyboard.

Step 4: The LED on the RF receiver will blink faster if the ID setting is

completed.

Step 5: If the keyboard does not work properly, please go back to step 2 and

repeat step 2 to Step 4.

TROUBLE SHOOTING GUIDE

Symptom Remedy

Keyboard or cursor

doesn’t function at all

• Please press the connect button on the receiver
• Within 8 second, please press the connect button on the

keyboard

• The LED on the receiver will blink if the connection

setting is completed

The cursor on the

screen moves

automatically without

operating.

• Reinstall batteries, and do not touch the joystick during

the installation.

• If the device doesn’t function, please follow the connect

ID setting

Orange LED on RF

receiver is not lit

• Ensure computer is powered on and receiver is

connected to the USB port of computer.

• Unplug the receiver and plug it in again.

Keyboard or cursor

doesn’t function

properly

• When you press a key and the ‘transmitter’ LED on the

keyboard does not blink, it could be out of battery and

please replace the battery of keyboard.

• If the LED on RF receiver dose not blink when you

operate the keyboard or joystick, please reposition the

keyboard and ensure the distance between keyboard and

RF receiver is within 7 meters or less

• If the problem persists, please reset the connect ID.

Please go to connect ID setting procedure.

For further Question

Please e-mail us at www.ione.com.tw or

www.itron-europe.com.