Справочник Пользователя для Ione RFSCORPIUSP20U
receiver will start to blink.
Step 3: Within 8 seconds, please press the “connect” on the keyboard.
Step 4: The LED on the RF receiver will blink faster if the ID setting is
completed.
Step 5: If the keyboard does not work properly, please go back to step 2 and
repeat step 2 to Step 4.
TROUBLE SHOOTING GUIDE
Symptom Remedy
Keyboard or cursor
doesn’t function at all
• Please press the connect button on the receiver
• Within 8 second, please press the connect button on the
• Within 8 second, please press the connect button on the
keyboard
• The LED on the receiver will blink if the connection
setting is completed
The cursor on the
screen moves
automatically without
operating.
• Reinstall batteries, and do not touch the joystick during
the installation.
• If the device doesn’t function, please follow the connect
ID setting
Orange LED on RF
receiver is not lit
• Ensure computer is powered on and receiver is
connected to the USB port of computer.
• Unplug the receiver and plug it in again.
Keyboard or cursor
doesn’t function
properly
• When you press a key and the ‘transmitter’ LED on the
keyboard does not blink, it could be out of battery and
please replace the battery of keyboard.
• If the LED on RF receiver dose not blink when you
operate the keyboard or joystick, please reposition the
keyboard and ensure the distance between keyboard and
RF receiver is within 7 meters or less
• If the problem persists, please reset the connect ID.
Please go to connect ID setting procedure.
For further Question
Please e-mail us at www.ione.com.tw or
www.itron-europe.com.