Digital Security Controls Ltd. 09WT4911 Manual Do Utilizador

FCC Compliance Statement
CAUTION: Changes or modifications not expressly approved by Digital
Security Controls could void your authority to use this equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IC: 160A-WT4911 The term ‘IC:’ before the radio certification number
only signifies that Industry Canada technical specifications were met.
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.

Limited Warranty
Digital Security Controls warrants that for a period of 12 months from the

date of purchase, the product shall be free of defects in materials and

workmanship under normal use and that in fulfilment of any breach of

such warranty, Digital Security Controls shall, at its option, repair or

replace the defective equipment upon return of the equipment to its repair

depot. This warranty applies only to defects in parts and workmanship

and not to damage incurred in shipping or handling, or damage due to

causes beyond the control of Digital Security Controls such as lightning,

excessive voltage, mechanical shock, water damage, or damage arising

out of abuse, alteration or improper application of the equipment. The

foregoing warranty shall apply only to the original buyer, and is and shall

be in lieu of any and all other warranties, whether expressed or implied

and of all other obligations or liabilities on the part of Digital Security Con-

trols. Digital Security Controls neither assumes responsibility for, nor

authorizes any other person purporting to act on its behalf to modify or to

change this warranty, nor to assume for it any other warranty or liability

concerning this product. In no event shall Digital Security Controls be lia-

ble for any direct, indirect or consequential damages, loss of anticipated

profits, loss of time or any other losses incurred by the buyer in connection

with the purchase, installation or operation or failure of this product.

IMPORTANT - READ CAREFULLY: DSC Software purchased with or without Prod-
ucts and Components is copyrighted and is purchased under the following license terms:
• This End-User License Agreement (“EULA”) is a legal agreement between

You (the company, individual or entity who acquired the Software and any
related Hardware) and Digital Security Controls, a division of Tyco Safety
Products Canada Ltd. (“DSC”), the manufacturer of the integrated security
systems and the developer of the software and any related products or com-
ponents (“HARDWARE”) which You acquired. 

• If the DSC software product (“SOFTWARE PRODUCT” or “SOFT-

WARE”) is intended to be accompanied by HARDWARE, and is NOT
accompanied by new HARDWARE, You may not use, copy or install the
SOFTWARE PRODUCT. The SOFTWARE PRODUCT includes com-
puter software, and may include associated media, printed materials, and
“online” or electronic documentation. 

• Any software provided along with the SOFTWARE PRODUCT that is

associated with a separate end-user license agreement is licensed to You
under the terms of that license agreement. 

By installing, copying, downloading, storing, accessing or otherwise using the
SOFTWARE PRODUCT, You agree unconditionally to be bound by the terms
of this EULA, even if this EULA is deemed to be a modification of any previ-
ous arrangement or contract. If You do not agree to the terms of this EULA,
DSC is unwilling to license the SOFTWARE PRODUCT to You, and You
have no right to use it.

SOFTWARE PRODUCT LICENSE
The SOFTWARE PRODUCT is protected by copyright laws and international copy-
right treaties, as well as other intellectual property laws and treaties. The SOFTWARE
PRODUCT is licensed, not sold. 
1.

GRANT OF LICENSE This EULA grants You the following rights:

(a) Software Installation and Use - For each license You acquire, You may have only

one copy of the SOFTWARE PRODUCT installed.

 

(b) Storage/Network Use - The SOFTWARE PRODUCT may not be installed,

accessed, displayed, run, shared or used concurrently on or from different computers,

including a workstation, terminal or other digital electronic device (“Device”). In other

words, if You have several workstations, You will have to acquire a license for each

workstation where the SOFTWARE will be used.

(c) Backup Copy - You may make back-up copies of the SOFTWARE PRODUCT,

but You may only have one copy per license installed at any given time. You may use the

back-up copy solely for archival purposes. Except as expressly provided in this EULA,

You may not otherwise make copies of the SOFTWARE PRODUCT, including the

printed materials accompanying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS 
(a) Limitations on Reverse Engineering, Decompilation and Disassembly - You may

not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except

and only to the extent that such activity is expressly permitted by applicable law not-

withstanding this limitation. You may not make any changes or modifications to the

Software, without the written permission of an officer of DSC. You may not remove any

proprietary notices, marks or labels from the Software Product. You shall institute rea-

sonable measures to ensure compliance with the terms and conditions of this EULA.

(b) Separation of Components - The SOFTWARE PRODUCT is licensed as a single

product. Its component parts may not be separated for use on more than one HARD-

WARE unit.

(c) Single INTEGRATED PRODUCT -  If You acquired this SOFTWARE with
HARDWARE, then the SOFTWARE PRODUCT is licensed with the HARDWARE as
a single integrated product. In this case, the SOFTWARE PRODUCT may only be used
with the HARDWARE as set forth in this EULA.
(d) Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may

not make it available to others or post it on a server or web site.

(e) Software Product Transfer - You may transfer all of Your rights under this EULA

only as part of a permanent sale or transfer of the HARDWARE, provided You retain no

copies, You transfer all of the SOFTWARE PRODUCT (including all component parts,

the media and printed materials, any upgrades and this EULA), and provided the recipi-

ent agrees to the terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any

transfer must also include all prior versions of the SOFTWARE PRODUCT.

(f) Termination - Without prejudice to any other rights, DSC may terminate this

EULA if You fail to comply with the terms and conditions of this EULA. In such event,

You must destroy all copies of the SOFTWARE PRODUCT and all of its component

parts.

(g) Trademarks - This EULA does not grant You any rights in connection with any

trademarks or service marks of DSC or its suppliers.

3. COPYRIGHT - All title and intellectual property rights in and to the

SOFTWARE PRODUCT (including but not limited to any images, photo-

graphs, and text incorporated into the SOFTWARE PRODUCT), the accom-

panying printed materials, and any copies of the SOFTWARE PRODUCT, are

owned by DSC or its suppliers. You may not copy the printed materials

accompanying the SOFTWARE PRODUCT. All title and intellectual property

rights in and to the content which may be accessed through use of the SOFT-

WARE PRODUCT are the property of the respective content owner and may

be protected by applicable copyright or other intellectual property laws and

treaties. This EULA grants You no rights to use such content. All rights not

expressly granted under this EULA are reserved by DSC and its suppliers.

4. EXPORT RESTRICTIONS - You agree that You will not export or re-export the
SOFTWARE PRODUCT to any country, person, or entity subject to Canadian export
restrictions. 
5. CHOICE OF LAW - This Software License Agreement is governed by the laws of
the Province of Ontario, Canada.
6. ARBITRATION - All disputes arising in connection with this Agreement shall be
determined by final and binding arbitration in accordance with the Arbitration Act, and
the parties agree to be bound by the arbitrator’s decision. The place of arbitration shall
be Toronto, Canada, and the language of the arbitration shall be English.
7.  LIMITED WARRANTY

(a)  NO WARRANTY - DSC PROVIDES THE SOFTWARE “AS IS” WITHOUT

WARRANTY. DSC DOES NOT WARRANT THAT THE SOFTWARE WILL MEET

YOUR REQUIREMENTS OR THAT OPERATION OF THE SOFTWARE WILL BE

UNINTERRUPTED OR ERROR-FREE. (b)  CHANGES IN OPERATING ENVI-

RONMENT -  DSC shall not be responsible for problems caused by changes in the

operating characteristics of the HARDWARE, or for problems in the interaction of the

SOFTWARE PRODUCT with non-DSC-SOFTWARE or HARDWARE PRODUCTS.

(c) LIMITATION OF LIABILITY; WARRANTY REFLECTS ALLOCATION OF

RISK  - IN ANY EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDI-

TIONS NOT STATED IN THIS LICENSE AGREEMENT, DSC’S ENTIRE LIABIL-

ITY UNDER ANY PROVISION OF THIS LICENSE AGREEMENT SHALL BE

LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU TO

LICENSE THE SOFTWARE PRODUCT AND FIVE CANADIAN DOLLARS

(CAD$5.00).  BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR

INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO

YOU. (d) DISCLAIMER OF WARRANTIES  - THIS WARRANTY CONTAINS

THE ENTIRE WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL

OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED (INCLUDING

ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE) AND OF ALL OTHER OBLIGATIONS OR LIABILI-

TIES ON THE PART OF DSC. DSC MAKES NO OTHER WARRANTIES. DSC

NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON PURPORTING

TO ACT ON ITS BEHALF TO MODIFY OR TO CHANGE THIS WARRANTY,

NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY CON-

CERNING THIS SOFTWARE PRODUCT. (e) EXCLUSIVE REMEDY AND LIMI-

TATION OF WARRANTY  -  UNDER NO CIRCUMSTANCES SHALL DSC BE

LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT

DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CON-

TRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER LEGAL THE-

ORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF

PROFITS, LOSS OF THE SOFTWARE PRODUCT OR ANY ASSOCIATED

EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE OR REPLACEMENT

EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS TIME,

THE CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY

TO PROPERTY.  WARNING:

DSC recommends that the entire system be completely tested on a regular
basis. However, despite frequent testing, and due to, but not limited to, crimi-
nal tampering or electrical disruption, it is possible for this SOFTWARE
PRODUCT to fail to perform as expected.

© 2009 Digital Security Controls, Toronto, Canada  
Technical Support: 1-800-387-3630 (Canada & U.S.) or 905-760-3036 • www.dsc.com
Printed in Canada

This equipment has been tested and found to comply with the limits for a 
class B digital device, pursuant to Part 15 of the FCC rules.