ADC Telecommunications Inc. PSM230WM Manual Do Utilizador
Cable Connecons for an HDM RF Module
TX0/RX0
TX1/RX1
POWER
DATA 1 (DIV)
DATA 0 (PRIM)
Cable Connecon Notes
• Always connect the Power cable.
• Always connect the two LVDS cables: PRIM and DIV.
• SISO requires one RF cable (TX0/RX0).
• MIMO and Dual-Band require two RF cables
(TX1/RX1 and TX0/RX0).
• Always connect the two LVDS cables: PRIM and DIV.
• SISO requires one RF cable (TX0/RX0).
• MIMO and Dual-Band require two RF cables
(TX1/RX1 and TX0/RX0).
FlexWave Prism Remote Unit RF Module Installation Guide
Page 39
TECP-77-141 Issue 8 • 300001744178 Rev H • August 2015
©2015 TE Connectivity
CAUTION! Ensure that all cable bends are below the top edge of the Connector Interface Panel as indicated by the
dashed line in the preceding figure. Failure to correctly position the cables could inhibit closing the
Remote Unit door, which can result in damage to the cables.
Remote Unit door, which can result in damage to the cables.
Figure 22. Cable Connections for HDM RF Modules
lists how to correctly connect HDM RF Modules to the Antenna ports on the bottom of the Remote Unit.
Table 13.
HDM Antenna Port Mapping
RF Module Catalog #
Description
TX0/RX0
TX1/RX1
20W 700 lABC Module, MIMO HDM, Single-Bay
Path 1
Path 2
20W 700 uC Module, MIMO HDM, Single-Bay
Path 1
Path 2
20W 700 lABC/700uC, Dual, Single-Bay
700 lABC
700 uC
20W 800 MIMO, Single Bay, with two External Filters
Path 1
Path 2
20W 800 SMR/ 1900 PCS, Dual RF Module
1900
800
20W 850 DUAL, MIMO, Single Bay
Path 1
Path 2
20W 850 Cell/1900 PCS, Dual, Single-Bay
1900
850
20W 1900 PCS Dual MIMO, Single-Bay
Path 1
Path 2
20W 1900/2100 Dual, Single Bay
2100
1900
20W HDM AWS Band 4 MIMO, Single-Bay
Path 1
Path 2
(1) A 20W 800 SMR/ 1900 PCS, Dual RF Module RF Module (FWP-441T841MOD) requires a FlexWave Notch
Filter (FWP-SPRINTFILTER) between the Remote Unit and the antenna to provide protection from spurious
emissions in the Public Safety band below 861.35 MHz and the Cellular band above 869.5 MHz. Information
on how to install the Notch Filter is provided in
emissions in the Public Safety band below 861.35 MHz and the Cellular band above 869.5 MHz. Information
on how to install the Notch Filter is provided in
.
FWP-L4MT000MOD
FWP-U4MT000MOD
FW P-L4MTU4MMOD
FWP-44MT000MOD
FWP-441T841M OD
(1)
FWP-B4MT000MOD
FWP-C4MT000MOD
FWP-84MT000MOD
FWP-84MTA4M MOD
F W P - A 4 M T 0 00 M O D