Badger Meter Inc 2014GWGAL Manual Do Utilizador

4 .  Insert the insulator assembly into the metallic housing using the Code A orientation as shown in Figure 24 . You will 

hear a ”click“ to confirm a complete connection .

Code A orientation must be used or the plug will not fit into the receptacle . Assembled RJ45 plugs cannot be 

disassembled without a special tool (67163-001) and must be replaced .

5 .  Screw the cable gland into the metallic housing and tighten the cable gland nut to 30…45 inch-pounds 

using wrenches .

6 .  Tighten the dome nut to 20 inch-pounds using a wrench . The dome nut seal must be in firm contact with outdoor 

rated Cat .5e Ethernet cable .

7 .  Remove the bayonet lock cap from the RJ45 receptacle on the gateway enclosure by turning the cap 1/4 turn, 

counter-clockwise .

8 .  Connect the RJ45 plug assembly to the RJ45 receptacle and secure by turning the metal housing 1/4 turn, clockwise .

Do not use a serial-to-LAN adapter on the GALAXY II gateway receiver 

For additional information, refer to 

 .

RJ45 Receptacle Bayonet 

Lock Cap