Compal Electronics Inc LXB-L15C Manual Do Utilizador
9
HOW TO ADJUST A SETTING
The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows (see figure
4) .If OSD window is in English when power on (see figure 5), press the
Contrast/UP Key or Brightness/Down Key to choosethe next window. Choose
the Chinese, then press MENU Key for confirming. OSD window will display in
Chinese.
1. Press the MENU-Key to show the OSD window. See figure 4.
2. Press
(On-Screen-Display). The main menu will be displayed as follows (see figure
4) .If OSD window is in English when power on (see figure 5), press the
Contrast/UP Key or Brightness/Down Key to choosethe next window. Choose
the Chinese, then press MENU Key for confirming. OSD window will display in
Chinese.
1. Press the MENU-Key to show the OSD window. See figure 4.
2. Press
or
to select the adjusted item, then press the MENU-key.
3. Press
or
to change the settings of selected item. Press MENU-key
when desired setting is done.
4. If you want to adjust any other items, repeat steps 2-4.
5. To exit and save the setting, press
5. To exit and save the setting, press
or
to the exit item and press
MENU-key, or leave the monitor alone for 10 seconds.
6. When the OSD window is active, it shows the input signal timing. The "H"
stands for the horizontal frequency and "V" stands for the vertical
frequency.
frequency.
Figure 4 Chinese OSD Message Figure 5 English OSD Message
ADJUSTING THE PICTURE
The description for function control LEDS
1. BRIGHTNESS & CONTRAST
1.1 BRIGHTNESS
Adjust the picture brightness.
1.2 CONTRAST
Adjust the picture contrast.
2. ADJUST POSITION
1.1 HORIZONTAL POSITION
Adjust the horizontal position of the picture.
? ? ? ?
? ? ? ?