Compal Electronics Inc LXB-L15C Manual Do Utilizador
8
FRONT PANEL CONTROL
•
Power Key
:
Press this knob to switch ON/OFF of monitor’s power.
•
MENU/ENTER:
Activate OSD menu or function adjusts confirmation.
•
Contrast
/
:
Adjust contrast or function adjustment.
•
Brightness
/
:
Adjust brightness or function adjustment.
•
Auto Config Key / EXIT:
1. When OSD menu is in active status, this knob will act as EXIT-KEY
(EXIT OSD menu)
2. When OSD menu is in off status, press this knob over 2 seconds to
be
in Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and
Focus automatically.
The Auto Adjustment function is used to set the HPos, VPos, Clock and
Focus automatically.
NOTES
•
Do not install the monitor in a location near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally
packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.